Hello, This series adds a number of improvements to Gumstix Overo.
Patch 1+2: fix an issue with the vendor prefix (reported long ago by Javier Martinez Canillas) Patch 3+4: add some missing pinctrl entries Patch 5: completely turn off the PMIC on power off Patch 6: enable the on-board Wifi Patch 7: add the high-speed USB PHY Patch 8: add specific timings for LAN9221 into a generic file -> This might interest other people using the same chip, result in doubled bandwith Patch 9: simplify omap3-tobi by using patch 8 Patch 10: add support for AT24C01 EEPROM used on expansion boards Patch 11: factorize parts common to all expansion boards Patch 12: rename omap3-tobi to omap3-overo-tobi -> I do not know to which extent this might qualify as an API breakage, but the new name is far better IMHO Patch 13 to 17: add new extension boards (Palo43, Gallop43, Alto35, Chestnut43, Summit) Patch 18: add the HDMI output -> this patch depends on Tomi Valkeinen's DT binding for OMAPDSS, which is not yet merged, so this patch will have to wait The patches 13 to 17 are based on the hardware schematics and compile-tested, as I do not have the necessary hardware (anyone willing to send me some boards ? :-) We are mainly missing the support for the various LCDs, the accelerometer + probably other small things. This series is based on Tony's omap-for-v3.14/dt branch + work from Tomi [1] for the patch 18. Benoit: I guess that I am too late for the 3.14... ? Regards, Florian Florian Vaussard (18): of: add vendor prefix for Gumstix ARM: dts: omap3-tobi: Use the correct vendor prefix ARM: dts: omap3-tobi: Add missing pinctrl ARM: dts: omap3-overo: Add missing pinctrl ARM: dts: omap3-overo: Use complete poweroff ARM: dts: omap3-overo: Enable MMC2 ARM: dts: omap3-overo: Add HSUSB PHY ARM: dts: omap: Add common file for SMSC9221 ARM: dts: omap3-tobi: Use include file omap-gpmc-smsc9221 ARM: dts: omap3-tobi: Add AT24C01 EEPROM ARM: dts: omap3-tobi: Create a file for common Gumstix peripherals ARM: dts: omap3-tobi: Rename to omap3-overo-tobi ARM: dts: Add support for the Overo Palo43 ARM: dts: Add support for the Overo Gallop43 ARM: dts: Add support for the Overo Alto35 ARM: dts: Add support for the Overo Chestnut43 ARM: dts: Add support for the Overo Summit ARM: dts: overo: Add support for DVI output .../devicetree/bindings/vendor-prefixes.txt | 1 + arch/arm/boot/dts/Makefile | 7 +- arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi | 58 ++++++++++ arch/arm/boot/dts/omap3-overo-alto35.dts | 52 +++++++++ arch/arm/boot/dts/omap3-overo-chestnut43.dts | 76 +++++++++++++ arch/arm/boot/dts/omap3-overo-common-dvi.dtsi | 108 ++++++++++++++++++ arch/arm/boot/dts/omap3-overo-common.dtsi | 39 +++++++ arch/arm/boot/dts/omap3-overo-gallop43.dts | 51 +++++++++ arch/arm/boot/dts/omap3-overo-palo43.dts | 52 +++++++++ arch/arm/boot/dts/omap3-overo-summit.dts | 30 +++++ .../dts/{omap3-tobi.dts => omap3-overo-tobi.dts} | 41 +------ arch/arm/boot/dts/omap3-overo.dtsi | 122 +++++++++++++++++++-- 12 files changed, 594 insertions(+), 43 deletions(-) create mode 100644 arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi create mode 100644 arch/arm/boot/dts/omap3-overo-alto35.dts create mode 100644 arch/arm/boot/dts/omap3-overo-chestnut43.dts create mode 100644 arch/arm/boot/dts/omap3-overo-common-dvi.dtsi create mode 100644 arch/arm/boot/dts/omap3-overo-common.dtsi create mode 100644 arch/arm/boot/dts/omap3-overo-gallop43.dts create mode 100644 arch/arm/boot/dts/omap3-overo-palo43.dts create mode 100644 arch/arm/boot/dts/omap3-overo-summit.dts rename arch/arm/boot/dts/{omap3-tobi.dts => omap3-overo-tobi.dts} (54%) -- 1.8.1.2 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html