From: Victor Kamensky <victor.kamen...@linaro.org> If kernel operates in BE mode on device that has LE bootloader/ROM code, we need to switch CPU to operate in BE mode before it will start to access BE data. Generic secondary_startup function that is called from OMAP specific secondary startup code will do the switch, but we need to do it earlier because OMAP's secondary_startup code works with BE data.
Signed-off-by: Victor Kamensky <victor.kamen...@linaro.org> Signed-off-by: Taras Kondratiuk <taras.kondrat...@linaro.org> --- This is a part of RFC series [1]. Based on v3.13-rc8. [1] http://www.spinics.net/lists/linux-omap/msg99927.html arch/arm/mach-omap2/omap-headsmp.S | 13 +++++++++++++ arch/arm/mach-omap2/sleep44xx.S | 6 ++++++ 2 files changed, 19 insertions(+) diff --git a/arch/arm/mach-omap2/omap-headsmp.S b/arch/arm/mach-omap2/omap-headsmp.S index 75e9295..75c98d4 100644 --- a/arch/arm/mach-omap2/omap-headsmp.S +++ b/arch/arm/mach-omap2/omap-headsmp.S @@ -17,6 +17,7 @@ #include <linux/linkage.h> #include <linux/init.h> +#include <asm/assembler.h> #include "omap44xx.h" @@ -58,6 +59,12 @@ hold: ldr r12,=0x103 bne hold /* + * ROM code operates in little endian mode, when we get control we + * need to switch it back to big endian mode. + */ +ARM_BE8(setend be) + + /* * we've been released from the wait loop,secondary_stack * should now contain the SVC stack for this core */ @@ -75,6 +82,12 @@ hold_2: ldr r12,=0x103 bne hold_2 /* + * ROM code operates in little endian mode, when we get control we + * need to switch it back to big endian mode. + */ +ARM_BE8(setend be) + + /* * GIC distributor control register has changed between * CortexA9 r1pX and r2pX. The Control Register secure * banked version is now composed of 2 bits: diff --git a/arch/arm/mach-omap2/sleep44xx.S b/arch/arm/mach-omap2/sleep44xx.S index 9086ce0..e556c8b 100644 --- a/arch/arm/mach-omap2/sleep44xx.S +++ b/arch/arm/mach-omap2/sleep44xx.S @@ -249,6 +249,12 @@ ENDPROC(omap4_finish_suspend) */ ENTRY(omap4_cpu_resume) /* + * ROM code operates in little endian mode, when we get control we + * need to switch it back to big endian mode. + */ +ARM_BE8(setend be) + + /* * Configure ACTRL and enable NS SMP bit access on CPU1 on HS device. * OMAP44XX EMU/HS devices - CPU0 SMP bit access is enabled in PPA * init and for CPU1, a secure PPA API provided. CPU0 must be ON -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
