Remove pdata quirks for the displays on boards that are now supported
properly with DT.
Signed-off-by: Tomi Valkeinen <tomi.valkei...@ti.com>
---
arch/arm/mach-omap2/dss-common.c | 224 -------------------------------------
arch/arm/mach-omap2/pdata-quirks.c | 3 -
2 files changed, 227 deletions(-)
diff --git a/arch/arm/mach-omap2/dss-common.c b/arch/arm/mach-omap2/dss-common.c
index dadccc91488c..010bb72d2b75 100644
--- a/arch/arm/mach-omap2/dss-common.c
+++ b/arch/arm/mach-omap2/dss-common.c
@@ -33,227 +33,3 @@
#include "soc.h"
#include "dss-common.h"
#include "mux.h"
-
-#define HDMI_GPIO_CT_CP_HPD 60 /* HPD mode enable/disable */
-#define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */
-#define HDMI_GPIO_HPD 63 /* Hotplug detect */
-
-#define PANDA_DVI_TFP410_POWER_DOWN_GPIO 0
-
-/* DVI Connector */
-static struct connector_dvi_platform_data omap4_panda_dvi_connector_pdata = {
- .name = "dvi",
- .source = "tfp410.0",
- .i2c_bus_num = 2,
-};
-
-static struct platform_device omap4_panda_dvi_connector_device = {
- .name = "connector-dvi",
- .id = 0,
- .dev.platform_data = &omap4_panda_dvi_connector_pdata,
-};
-
-/* TFP410 DPI-to-DVI chip */
-static struct encoder_tfp410_platform_data omap4_panda_tfp410_pdata = {
- .name = "tfp410.0",
- .source = "dpi.0",
- .data_lines = 24,
- .power_down_gpio = PANDA_DVI_TFP410_POWER_DOWN_GPIO,
-};
-
-static struct platform_device omap4_panda_tfp410_device = {
- .name = "tfp410",
- .id = 0,
- .dev.platform_data = &omap4_panda_tfp410_pdata,
-};
-
-/* HDMI Connector */
-static struct connector_hdmi_platform_data omap4_panda_hdmi_connector_pdata = {
- .name = "hdmi",
- .source = "tpd12s015.0",
-};
-
-static struct platform_device omap4_panda_hdmi_connector_device = {
- .name = "connector-hdmi",
- .id = 0,
- .dev.platform_data = &omap4_panda_hdmi_connector_pdata,
-};
-
-/* TPD12S015 HDMI ESD protection & level shifter chip */
-static struct encoder_tpd12s015_platform_data omap4_panda_tpd_pdata = {
- .name = "tpd12s015.0",
- .source = "hdmi.0",
-
- .ct_cp_hpd_gpio = HDMI_GPIO_CT_CP_HPD,
- .ls_oe_gpio = HDMI_GPIO_LS_OE,
- .hpd_gpio = HDMI_GPIO_HPD,
-};
-
-static struct platform_device omap4_panda_tpd_device = {
- .name = "tpd12s015",
- .id = 0,
- .dev.platform_data = &omap4_panda_tpd_pdata,
-};
-
-static struct omap_dss_board_info omap4_panda_dss_data = {
- .default_display_name = "dvi",
-};
-
-void __init omap4_panda_display_init_of(void)
-{
- omap_display_init(&omap4_panda_dss_data);
-
- platform_device_register(&omap4_panda_tfp410_device);
- platform_device_register(&omap4_panda_dvi_connector_device);
-
- platform_device_register(&omap4_panda_tpd_device);
- platform_device_register(&omap4_panda_hdmi_connector_device);
-}
-
-
-/* OMAP4 Blaze display data */
-
-#define DISPLAY_SEL_GPIO 59 /* LCD2/PicoDLP switch */
-#define DLP_POWER_ON_GPIO 40
-
-static struct panel_dsicm_platform_data dsi1_panel = {
- .name = "lcd",
- .source = "dsi.0",
- .reset_gpio = 102,
- .use_ext_te = false,
- .ext_te_gpio = 101,
- .pin_config = {
- .num_pins = 6,
- .pins = { 0, 1, 2, 3, 4, 5 },
- },
-};
-
-static struct platform_device sdp4430_lcd_device = {
- .name = "panel-dsi-cm",
- .id = 0,
- .dev.platform_data = &dsi1_panel,
-};
-
-static struct panel_dsicm_platform_data dsi2_panel = {
- .name = "lcd2",
- .source = "dsi.1",
- .reset_gpio = 104,
- .use_ext_te = false,
- .ext_te_gpio = 103,
- .pin_config = {
- .num_pins = 6,
- .pins = { 0, 1, 2, 3, 4, 5 },
- },
-};
-
-static struct platform_device sdp4430_lcd2_device = {
- .name = "panel-dsi-cm",
- .id = 1,
- .dev.platform_data = &dsi2_panel,
-};
-
-/* HDMI Connector */
-static struct connector_hdmi_platform_data sdp4430_hdmi_connector_pdata = {
- .name = "hdmi",
- .source = "tpd12s015.0",
-};
-
-static struct platform_device sdp4430_hdmi_connector_device = {
- .name = "connector-hdmi",
- .id = 0,
- .dev.platform_data = &sdp4430_hdmi_connector_pdata,
-};
-
-/* TPD12S015 HDMI ESD protection & level shifter chip */
-static struct encoder_tpd12s015_platform_data sdp4430_tpd_pdata = {
- .name = "tpd12s015.0",
- .source = "hdmi.0",
-
- .ct_cp_hpd_gpio = HDMI_GPIO_CT_CP_HPD,
- .ls_oe_gpio = HDMI_GPIO_LS_OE,
- .hpd_gpio = HDMI_GPIO_HPD,
-};
-
-static struct platform_device sdp4430_tpd_device = {
- .name = "tpd12s015",
- .id = 0,
- .dev.platform_data = &sdp4430_tpd_pdata,
-};
-
-
-static struct omap_dss_board_info sdp4430_dss_data = {
- .default_display_name = "lcd",
-};
-
-/*
- * we select LCD2 by default (instead of Pico DLP) by setting DISPLAY_SEL_GPIO.
- * Setting DLP_POWER_ON gpio enables the VDLP_2V5 VDLP_1V8 and VDLP_1V0 rails
- * used by picodlp on the 4430sdp platform. Keep this gpio disabled as LCD2 is
- * selected by default
- */
-void __init omap_4430sdp_display_init_of(void)
-{
- int r;
-
- r = gpio_request_one(DISPLAY_SEL_GPIO, GPIOF_OUT_INIT_HIGH,
- "display_sel");
- if (r)
- pr_err("%s: Could not get display_sel GPIO\n", __func__);
-
- r = gpio_request_one(DLP_POWER_ON_GPIO, GPIOF_OUT_INIT_LOW,
- "DLP POWER ON");
- if (r)
- pr_err("%s: Could not get DLP POWER ON GPIO\n", __func__);
-
- omap_display_init(&sdp4430_dss_data);
-
- platform_device_register(&sdp4430_lcd_device);
- platform_device_register(&sdp4430_lcd2_device);
-
- platform_device_register(&sdp4430_tpd_device);
- platform_device_register(&sdp4430_hdmi_connector_device);
-}
-
-
-/* OMAP3 IGEPv2 data */
-
-#define IGEP2_DVI_TFP410_POWER_DOWN_GPIO 170
-
-/* DVI Connector */
-static struct connector_dvi_platform_data omap3_igep2_dvi_connector_pdata = {
- .name = "dvi",
- .source = "tfp410.0",
- .i2c_bus_num = 2,
-};
-
-static struct platform_device omap3_igep2_dvi_connector_device = {
- .name = "connector-dvi",
- .id = 0,
- .dev.platform_data = &omap3_igep2_dvi_connector_pdata,
-};
-
-/* TFP410 DPI-to-DVI chip */
-static struct encoder_tfp410_platform_data omap3_igep2_tfp410_pdata = {
- .name = "tfp410.0",
- .source = "dpi.0",
- .data_lines = 24,
- .power_down_gpio = IGEP2_DVI_TFP410_POWER_DOWN_GPIO,
-};
-
-static struct platform_device omap3_igep2_tfp410_device = {
- .name = "tfp410",
- .id = 0,
- .dev.platform_data = &omap3_igep2_tfp410_pdata,
-};
-
-static struct omap_dss_board_info igep2_dss_data = {
- .default_display_name = "dvi",
-};
-
-void __init omap3_igep2_display_init_of(void)
-{
- omap_display_init(&igep2_dss_data);
-
- platform_device_register(&omap3_igep2_tfp410_device);
- platform_device_register(&omap3_igep2_dvi_connector_device);
-}
diff --git a/arch/arm/mach-omap2/pdata-quirks.c
b/arch/arm/mach-omap2/pdata-quirks.c
index 39f020c982e8..68e3bca42e60 100644
--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -80,7 +80,6 @@ static void __init hsmmc2_internal_input_clk(void)
static void __init omap3_igep0020_legacy_init(void)
{
- omap3_igep2_display_init_of();
}
static void __init omap3_evm_legacy_init(void)
@@ -97,14 +96,12 @@ static void __init omap3_zoom_legacy_init(void)
#ifdef CONFIG_ARCH_OMAP4
static void __init omap4_sdp_legacy_init(void)
{
- omap_4430sdp_display_init_of();
legacy_init_wl12xx(WL12XX_REFCLOCK_26,
WL12XX_TCXOCLOCK_26, 53);
}
static void __init omap4_panda_legacy_init(void)
{
- omap4_panda_display_init_of();
legacy_init_ehci_clk("auxclk3_ck");
legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 53);
}
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
