> >>>> Use a meaningful name for the reference clocks so that it indicates the
> >>>> function.
> >>>>
> >>>> CC: Lee Jones <lee.jo...@linaro.org>
> >>>> CC: Samuel Ortiz <sa...@linux.intel.com>
> >>>> Signed-off-by: Roger Quadros <rog...@ti.com>
> >>>> ---
> >>>> drivers/mfd/omap-usb-host.c | 6 +++---
> >>>> 1 file changed, 3 insertions(+), 3 deletions(-)
> >>>>
> >>>> diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
> >>>> index 60a3bed..ce620a8 100644
> >>>> --- a/drivers/mfd/omap-usb-host.c
> >>>> +++ b/drivers/mfd/omap-usb-host.c
> >>>> @@ -714,21 +714,21 @@ static int usbhs_omap_probe(struct platform_device
> >>>> *pdev)
> >>>> goto err_mem;
> >>>> }
> >>>>
> >>>> - omap->xclk60mhsp1_ck = devm_clk_get(dev, "xclk60mhsp1_ck");
> >>>> + omap->xclk60mhsp1_ck = devm_clk_get(dev, "refclk_60m_ext_p1");
> >>>
> >>> You can't do that. These changes will have to be in the same patch as
> >>> the core change i.e. where they are initialised.
> >>
> >> I'm not touching them anywhere in this series. When core changes are you
> >> referring to?
> >
> > The ones in:
> > arch/arm/mach-omap2/cclock3xxx_data.c
>
> OK, right. They are now no longer needed so I'll get rid of them.
> In fact that change should either be in a separate patch or combined with
> PATCH 2
> in this series. What do you suggest?
A separate patch will do fine.
> >>>> if (IS_ERR(omap->xclk60mhsp1_ck)) {
> >>>> ret = PTR_ERR(omap->xclk60mhsp1_ck);
> >>>> dev_err(dev, "xclk60mhsp1_ck failed error:%d\n", ret);
> >>>> goto err_mem;
> >>>> }
> >>>>
> >>>> - omap->xclk60mhsp2_ck = devm_clk_get(dev, "xclk60mhsp2_ck");
> >>>> + omap->xclk60mhsp2_ck = devm_clk_get(dev, "refclk_60m_ext_p2");
> >>>> if (IS_ERR(omap->xclk60mhsp2_ck)) {
> >>>> ret = PTR_ERR(omap->xclk60mhsp2_ck);
> >>>> dev_err(dev, "xclk60mhsp2_ck failed error:%d\n", ret);
> >>>> goto err_mem;
> >>>> }
> >>>>
> >>>> - omap->init_60m_fclk = devm_clk_get(dev, "init_60m_fclk");
> >>>> + omap->init_60m_fclk = devm_clk_get(dev, "refclk_60m_int");
> >>>> if (IS_ERR(omap->init_60m_fclk)) {
> >>>> ret = PTR_ERR(omap->init_60m_fclk);
> >>>> dev_err(dev, "init_60m_fclk failed error:%d\n", ret);
> >>>
> >>
> >
>
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
