Looks like the OTG pins are off by 2 and we get this:
pinctrl-single 48002030.pinmux: pin 480021a0.0 already requested by
49020000.serial; cannot claim for 480ab000.usb_otg_hs
pinctrl-single 48002030.pinmux: pin-184 (480ab000.usb_otg_hs) status -22
pinctrl-single 48002030.pinmux: could not request pin 184 (480021a0.0) from
group pinmux_hsusb0_pins on device pinctrl-single
musb-omap2430 480ab000.usb_otg_hs: Error applying setting, reverse things back
That's probably because the TRM lists the values as
32-bit registers so every second needs 2 added to the
address. The OTG pin start range must start from
0x21a2, not 0x21a0.
Cc: Dmitry Lifshitz <lifsh...@compulab.co.il>
Signed-off-by: Tony Lindgren <t...@atomide.com>
---
arch/arm/boot/dts/omap3-cm-t3x30.dtsi | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/arch/arm/boot/dts/omap3-cm-t3x30.dtsi
b/arch/arm/boot/dts/omap3-cm-t3x30.dtsi
index d000558..75e0a1f 100644
--- a/arch/arm/boot/dts/omap3-cm-t3x30.dtsi
+++ b/arch/arm/boot/dts/omap3-cm-t3x30.dtsi
@@ -35,18 +35,18 @@
hsusb0_pins: pinmux_hsusb0_pins {
pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)
/* hsusb0_clk.hsusb0_clk */
- OMAP3_CORE1_IOPAD(0x21a2, PIN_OUTPUT | MUX_MODE0)
/* hsusb0_stp.hsusb0_stp */
- OMAP3_CORE1_IOPAD(0x21a4, PIN_INPUT_PULLDOWN |
MUX_MODE0) /* hsusb0_dir.hsusb0_dir */
- OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT_PULLDOWN |
MUX_MODE0) /* hsusb0_nxt.hsusb0_nxt */
- OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT_PULLDOWN |
MUX_MODE0) /* hsusb0_data0.hsusb2_data0 */
- OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT_PULLDOWN |
MUX_MODE0) /* hsusb0_data1.hsusb0_data1 */
- OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT_PULLDOWN |
MUX_MODE0) /* hsusb0_data2.hsusb0_data2 */
- OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT_PULLDOWN |
MUX_MODE0) /* hsusb0_data7.hsusb0_data3 */
- OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT_PULLDOWN |
MUX_MODE0) /* hsusb0_data7.hsusb0_data4 */
- OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT_PULLDOWN |
MUX_MODE0) /* hsusb0_data7.hsusb0_data5 */
- OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT_PULLDOWN |
MUX_MODE0) /* hsusb0_data7.hsusb0_data6 */
- OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT_PULLDOWN |
MUX_MODE0) /* hsusb0_data7.hsusb0_data7 */
+ OMAP3_CORE1_IOPAD(0x21a2, PIN_OUTPUT | MUX_MODE0)
/* hsusb0_clk.hsusb0_clk */
+ OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0)
/* hsusb0_stp.hsusb0_stp */
+ OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT_PULLDOWN |
MUX_MODE0) /* hsusb0_dir.hsusb0_dir */
+ OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT_PULLDOWN |
MUX_MODE0) /* hsusb0_nxt.hsusb0_nxt */
+ OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT_PULLDOWN |
MUX_MODE0) /* hsusb0_data0.hsusb2_data0 */
+ OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT_PULLDOWN |
MUX_MODE0) /* hsusb0_data1.hsusb0_data1 */
+ OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT_PULLDOWN |
MUX_MODE0) /* hsusb0_data2.hsusb0_data2 */
+ OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT_PULLDOWN |
MUX_MODE0) /* hsusb0_data7.hsusb0_data3 */
+ OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT_PULLDOWN |
MUX_MODE0) /* hsusb0_data7.hsusb0_data4 */
+ OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT_PULLDOWN |
MUX_MODE0) /* hsusb0_data7.hsusb0_data5 */
+ OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT_PULLDOWN |
MUX_MODE0) /* hsusb0_data7.hsusb0_data6 */
+ OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT_PULLDOWN |
MUX_MODE0) /* hsusb0_data7.hsusb0_data7 */
>;
};
};
--
1.8.1.1
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
