On 16/05/14 00:02, Joachim Eastwood wrote:
> On 15 May 2014 15:18, Tomi Valkeinen <tomi.valkei...@ti.com> wrote:
>> On 12/05/14 20:58, Joachim Eastwood wrote:
>>> Hello Tomi,
>>>
>>> There seems to be a mismatch between your panel-dpi code and DT docs.
>>>
>>> The docs state that enable-gpios is optinal but in panel-dpi.c you
>>> have the following code
>>> gpio = devm_gpiod_get(&pdev->dev, "enable");
>>> if (IS_ERR(gpio)) {
>>> dev_err(&pdev->dev, "failed to parse enable gpio\n");
>>> return PTR_ERR(gpio);
>>> } else {
>>> gpiod_direction_output(gpio, 0);
>>> ddata->enable_gpio = gpio;
>>> }
>>>
>>> Making probing fail on my DT since I don't use enable-gpios with
>>
>> Would this work? Only compile tested.
>>
>> diff --git a/drivers/video/fbdev/omap2/displays-new/panel-dpi.c
>> b/drivers/video/fbdev/omap2/displays-new/panel-dpi.c
>> index dca6b10d1157..2ac38eaa4c8f 100644
>> --- a/drivers/video/fbdev/omap2/displays-new/panel-dpi.c
>> +++ b/drivers/video/fbdev/omap2/displays-new/panel-dpi.c
>> @@ -210,14 +210,19 @@ static int panel_dpi_probe_of(struct platform_device
>> *pdev)
>> struct gpio_desc *gpio;
>>
>> gpio = devm_gpiod_get(&pdev->dev, "enable");
>> +
>> if (IS_ERR(gpio)) {
>> - dev_err(&pdev->dev, "failed to parse enable gpio\n");
>> - return PTR_ERR(gpio);
>> + r = PTR_ERR(gpio);
>> + if (r == -EPROBE_DEFER || r != -ENOENT)
>> + return r;
>> + else
>> + gpio = NULL;
>> } else {
>> gpiod_direction_output(gpio, 0);
>> - ddata->enable_gpio = gpio;
>> }
>>
>> + ddata->enable_gpio = gpio;
>> +
>> ddata->backlight_gpio = -ENOENT;
>>
>> r = of_get_display_timing(node, "panel-timing", &timing);
>
> Seems to do the trick here.
>
> Display is showing Tux's on boot up again :)
The check above was a bit too complex. Here's an updated patch.
From f48b44ca73e29b2328e7852d9beb06b161bb1cb4 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkei...@ti.com>
Date: Thu, 15 May 2014 16:19:44 +0300
Subject: [PATCH] OMAPDSS: panel-dpi: enable-gpio
The enable gpio should be optional, but the driver returns an error if
it doesn't get the gpio.
So change the driver to accept -ENOENT error.
Signed-off-by: Tomi Valkeinen <tomi.valkei...@ti.com>
---
drivers/video/fbdev/omap2/displays-new/panel-dpi.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/drivers/video/fbdev/omap2/displays-new/panel-dpi.c
b/drivers/video/fbdev/omap2/displays-new/panel-dpi.c
index dca6b10d1157..3636b61dc9b4 100644
--- a/drivers/video/fbdev/omap2/displays-new/panel-dpi.c
+++ b/drivers/video/fbdev/omap2/displays-new/panel-dpi.c
@@ -210,14 +210,18 @@ static int panel_dpi_probe_of(struct platform_device
*pdev)
struct gpio_desc *gpio;
gpio = devm_gpiod_get(&pdev->dev, "enable");
+
if (IS_ERR(gpio)) {
- dev_err(&pdev->dev, "failed to parse enable gpio\n");
- return PTR_ERR(gpio);
+ if (PTR_ERR(gpio) != -ENOENT)
+ return PTR_ERR(gpio);
+ else
+ gpio = NULL;
} else {
gpiod_direction_output(gpio, 0);
- ddata->enable_gpio = gpio;
}
+ ddata->enable_gpio = gpio;
+
ddata->backlight_gpio = -ENOENT;
r = of_get_display_timing(node, "panel-timing", &timing);
--
1.9.1
signature.asc
Description: OpenPGP digital signature
