On 02/07/14 11:49, Sekhar Nori wrote: > On Tuesday 01 July 2014 09:44 PM, Stephen Warren wrote: >> On the Tegra systems I have, IRQF_TRIGGER_FALLING is the correct (or at >> least a valid) choice. That's probably because the Atmel IRQ signal is >> routed to our GPIO controller, which is also an IRQ controller, and then >> "forwarded" up the chain to the GIC, with the polarity the GIC expects. >> >> If IRQ_TRIGGER_FALLING doesn't work everywhere, then we'll need to add >> some kind of DT property to configure the polarity of the IRQ output. > > Yeah, I think so too. > > Nick, > > If you are going to rebase your branch, will you be able to fold in the > patch in my previous e-mail? Else, I can send a more formal patch to you.
Either IRQF_TRIGGER_FALLING or IRQF_TRIGGER_LOW will work with these chips (it isn't a question of polarity but whether it's edge- or level- triggered). There isn't a sensible default. Atmel prefer IRQF_TRIGGER_LOW, however I've seen some IRQ controllers will revert to a polled mode for IRQF_TRIGGER_LOW, which kills performance. So, the sensible course of action seems to be to remove the default IRQF_TRIGGER_FALLING in the device tree parsing, and provide a device tree parameter for the flags. If you agree, I will sort this out at my end, you don't need to send a patch. I have to leave it in in the case where there is neither static platform data, or device tree node, because that is used for some systems, but that shouldn't affect either of you. BTW, I do have a set of patches ready to send, once this change is made. cheers Nick -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
