On Sun, Jun 29, 2014 at 06:21:34PM +0200, Andre Heider wrote: > Hi, > > this series adds PRUv2 support to uio_pruss through devicetree, makes the > device usable on am33xx and enables it on beaglebone black. > Inspired by old patches from Matt Porter found in a downstream tree. > > To archieve that this series: > * adds a flag to omap_hwmod.c to get PRUSS out of hardreset (patch 5 and 6) > * adds devicetree support to uio_pruss (patch 7 and 9) > * adds the device to the am33xx dtsi and boneblack dts (patch 12 and 13) > > Bits and pieces: > * some cleanup (patch 1-4) > * take care of a fact that SRAM on am33xx is not exposed through UIO (patch 8) > * add runtime pm support to enable clocks (patch 10) > * allow the driver to be compiled on SOC_AM33XX (patch 11) > > This is only tested on beaglebone black (as that's the only hardware of the > PRUSS enabled families I have) with some basic GPIO and IRQ tests. > > Notes: > * I just got this hardware and I don't know if this UIO PRUSS business is > desired. Looking at the userspace driver I'd guess not so much ;), but this > interface is there for older generations anyway, and this small series lets > me use the device. > * is the hardreset thing I did there the right thing to do? I think the > proper way would be a reset controller (which apparently doesn't yet exist > for this SoC?) and let the driver deassert/assert on probe/remove? > * the platform device path has a clk_enable() / clk_put() calls. Are those > now redundant with the introduced pm_runtime_enable() pm_runtime_disable() > calls?
@OMAP guys: any comments? The series depends on patch 5 and 6; both touch common hwmod code. I noticed that AM437x now comes with 4 PRUSS cores, maybe you had something different in mind on how to expose these? Thanks in advance, Andre -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html