Add the device tree bindings document for am3353 wkup_m3.

Signed-off-by: Dave Gerlach <d-gerl...@ti.com>
CC: Ohad Ben-Cohen <o...@wizery.com>
CC: Benoit Cousson <bcous...@baylibre.com>
---
 .../bindings/remoteproc/wkup_m3_rproc.txt          | 46 ++++++++++++++++++++++
 1 file changed, 46 insertions(+)
 create mode 100644 
Documentation/devicetree/bindings/remoteproc/wkup_m3_rproc.txt

diff --git a/Documentation/devicetree/bindings/remoteproc/wkup_m3_rproc.txt 
b/Documentation/devicetree/bindings/remoteproc/wkup_m3_rproc.txt
new file mode 100644
index 0000000..e9dd909
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/wkup_m3_rproc.txt
@@ -0,0 +1,46 @@
+Wakeup M3 Remote Proc Driver
+=====================
+
+TI AMx3 Family devices use a Cortex M3 co-processor to help with various
+low power tasks that cannot be controlled from the MPU. The CM3 requires
+a firmware binary to accomplish this and communicates with the MPU through
+IPC registers present in the SoCs control module. The wkup_m3 remoteproc
+driver handles the loading of the firmware and exposes an API to
+communicate with the wkup_m3 through the use of the IPC registers and a
+mailbox.
+
+Wkup M3 Device Node:
+====================
+A wkup_m3 device node is used to represent a wakeup M3 IP instance within
+a SoC. The sub-mailboxes are represented as child node of this parent node.
+
+Required properties:
+--------------------
+- compatible:          Should be "ti,am3353-wkup-m3" for AM33xx SoCs
+- reg:                 Contains the wkup_m3 register address ranges for
+                       umem, dmem, and ipc-regs.
+- reg-names:           Names for reg addresses given above
+- interrupts:          Contains the interrupt information for the wkup_m3
+                       interrupt that signals the MPU.
+- ti,hwmods:           Name of the hwmod associated with the mailbox
+- ti,no-reset-on-init: Reset is handled after fw has been loaded, not at
+                       init of hwmod.
+- mbox-names:          Name of the mbox channel for the IPC framework
+- mbox:                        Phandle used by IPC framework to get correct 
mbox
+                       channel for communication.
+
+Example:
+--------
+/* AM33xx */
+wkup_m3: wkup_m3@44d00000 {
+       compatible = "ti,am3353-wkup-m3";
+       reg = <0x44d00000 0x4000
+              0x44d80000 0x2000
+              0x44e11324 0x0024>;
+       reg-names = "m3_umem", "m3_dmem", "ipc_regs";
+       interrupts = <78>;
+       ti,hwmods = "wkup_m3";
+       ti,no-reset-on-init;
+       mbox-names = "wkup_m3";
+       mbox = <&mailbox &mbox_wkupm3>;
+};
-- 
1.9.0

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to