The rx path of the 8250_dma user in the RX-timeout case:
- it starts the RX transfer
if the rx-timeout interrupt occurs, it dmaengine_pause() the transfer
- step two is dmaengine_terminate_all() on this channel.
- based on dmaengine_tx_status() it learns the number of transferred
bytes.
- the rx interrupt occurs, it does not start the RX-transfer because
according to dmaengine_tx_status() the status of the current transfer
is still DMA_IN_PROGRESS because the earlier dmaengine_terminate_all()
did not reset this.
- on rx-timeout it invokes dmaengine_pause() again. This time, it
segfaults because the channel has no descriptor yet.
To make the upper case work better, this patch adds dma_cookie_complete()
to complete the cookie. Also it adds is an additional check for echan->edesc
in case the channel has no descriptor assigned.
Cc: Joel Fernandes <jo...@ti.com>
Signed-off-by: Sebastian Andrzej Siewior <bige...@linutronix.de>
---
drivers/dma/edma.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/dma/edma.c b/drivers/dma/edma.c
index d08c4de..ff05dd4 100644
--- a/drivers/dma/edma.c
+++ b/drivers/dma/edma.c
@@ -256,6 +256,7 @@ static int edma_terminate_all(struct edma_chan *echan)
* echan->edesc is NULL and exit.)
*/
if (echan->edesc) {
+ dma_cookie_complete(&echan->edesc->vdesc.tx);
echan->edesc = NULL;
edma_stop(echan->ch_num);
}
@@ -282,7 +283,7 @@ static int edma_slave_config(struct edma_chan *echan,
static int edma_dma_pause(struct edma_chan *echan)
{
/* Pause/Resume only allowed with cyclic mode */
- if (!echan->edesc->cyclic)
+ if (!echan->edesc || !echan->edesc->cyclic)
return -EINVAL;
edma_pause(echan->ch_num);
--
2.0.1
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
