Adding CPSW phy-id, CPSW and MDIO pinmux configuration for active and sleep states and enable them in board evm dts file.
Signed-off-by: Mugunthan V N <mugunthan...@ti.com> --- arch/arm/boot/dts/dra7-evm.dts | 107 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 107 insertions(+) diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index 50f8022..e5c4e33 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -151,6 +151,87 @@ 0xd0 (PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle */ >; }; + + cpsw_default: cpsw_default { + pinctrl-single,pins = < + /* Slave 1 */ + 0x250 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_tclk */ + 0x254 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_tctl */ + 0x258 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_td3 */ + 0x25c (PIN_OUTPUT | MUX_MODE0) /* rgmii1_td2 */ + 0x260 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_td1 */ + 0x264 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_td0 */ + 0x268 (PIN_INPUT | MUX_MODE0) /* rgmii1_rclk */ + 0x26c (PIN_INPUT | MUX_MODE0) /* rgmii1_rctl */ + 0x270 (PIN_INPUT | MUX_MODE0) /* rgmii1_rd3 */ + 0x274 (PIN_INPUT | MUX_MODE0) /* rgmii1_rd2 */ + 0x278 (PIN_INPUT | MUX_MODE0) /* rgmii1_rd1 */ + 0x27c (PIN_INPUT | MUX_MODE0) /* rgmii1_rd0 */ + + /* Slave 2 */ + 0x198 (PIN_OUTPUT | MUX_MODE3) /* rgmii2_tclk */ + 0x19c (PIN_OUTPUT | MUX_MODE3) /* rgmii2_tctl */ + 0x1a0 (PIN_OUTPUT | MUX_MODE3) /* rgmii2_td3 */ + 0x1a4 (PIN_OUTPUT | MUX_MODE3) /* rgmii2_td2 */ + 0x1a8 (PIN_OUTPUT | MUX_MODE3) /* rgmii2_td1 */ + 0x1ac (PIN_OUTPUT | MUX_MODE3) /* rgmii2_td0 */ + 0x1b0 (PIN_INPUT | MUX_MODE3) /* rgmii2_rclk */ + 0x1b4 (PIN_INPUT | MUX_MODE3) /* rgmii2_rctl */ + 0x1b8 (PIN_INPUT | MUX_MODE3) /* rgmii2_rd3 */ + 0x1bc (PIN_INPUT | MUX_MODE3) /* rgmii2_rd2 */ + 0x1c0 (PIN_INPUT | MUX_MODE3) /* rgmii2_rd1 */ + 0x1c4 (PIN_INPUT | MUX_MODE3) /* rgmii2_rd0 */ + >; + + }; + + cpsw_sleep: cpsw_sleep { + pinctrl-single,pins = < + /* Slave 1 */ + 0x250 (MUX_MODE15) + 0x254 (MUX_MODE15) + 0x258 (MUX_MODE15) + 0x25c (MUX_MODE15) + 0x260 (MUX_MODE15) + 0x264 (MUX_MODE15) + 0x268 (MUX_MODE15) + 0x26c (MUX_MODE15) + 0x270 (MUX_MODE15) + 0x274 (MUX_MODE15) + 0x278 (MUX_MODE15) + 0x27c (MUX_MODE15) + + /* Slave 1 */ + 0x198 (MUX_MODE15) + 0x19c (MUX_MODE15) + 0x1a0 (MUX_MODE15) + 0x1a4 (MUX_MODE15) + 0x1a8 (MUX_MODE15) + 0x1ac (MUX_MODE15) + 0x1b0 (MUX_MODE15) + 0x1b4 (MUX_MODE15) + 0x1b8 (MUX_MODE15) + 0x1bc (MUX_MODE15) + 0x1c0 (MUX_MODE15) + 0x1c4 (MUX_MODE15) + >; + }; + + davinci_mdio_default: davinci_mdio_default { + pinctrl-single,pins = < + /* MDIO */ + 0x23c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_data */ + 0x240 (PIN_INPUT_PULLUP | MUX_MODE0) /* mdio_clk */ + >; + }; + + davinci_mdio_sleep: davinci_mdio_sleep { + pinctrl-single,pins = < + 0x23c (MUX_MODE15) + 0x240 (MUX_MODE15) + >; + }; + }; &i2c1 { @@ -504,3 +585,29 @@ &usb2_phy2 { phy-supply = <&ldousb_reg>; }; + +&mac { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cpsw_default>; + pinctrl-1 = <&cpsw_sleep>; + dual_emac; +}; + +&cpsw_emac0 { + phy_id = <&davinci_mdio>, <2>; + phy-mode = "rgmii"; + dual_emac_res_vlan = <1>; +}; + +&cpsw_emac1 { + phy_id = <&davinci_mdio>, <3>; + phy-mode = "rgmii"; + dual_emac_res_vlan = <2>; +}; + +&davinci_mdio { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&davinci_mdio_default>; + pinctrl-1 = <&davinci_mdio_sleep>; +}; -- 2.1.0 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html