On Sun, 02 Nov 2014, Tony Lindgren wrote:
> Commit e7cd1d1eb16f ("mfd: twl4030-power: Add generic reset
> configuration") enabled configuring the PM features for twl4030.
>
> This caused poweroff command to fail on devices that have the
> BCI charger on twl4030 wired, or have power wired for VBUS.
> Instead of powering off, the device reboots. This is because
> voltage is detected on charger or VBUS with the default bits
> enabled for the power transition registers.
>
> To fix the issue, let's just clear VBUS and CHG bits as we want
> poweroff command to keep the system powered off.
>
> Fixes: e7cd1d1eb16f ("mfd: twl4030-power: Add generic reset configuration")
> Cc: sta...@vger.kernel.org # v3.16+
> Reported-by: Russell King <rmk+ker...@arm.linux.org.uk>
> Signed-off-by: Tony Lindgren <t...@atomide.com>
Applied to -fixes.
Not sure whether that was an Ack from Russell or not?
> --- a/drivers/mfd/twl4030-power.c
> +++ b/drivers/mfd/twl4030-power.c
> @@ -44,6 +44,15 @@ static u8 twl4030_start_script_address = 0x2b;
> #define PWR_DEVSLP BIT(1)
> #define PWR_DEVOFF BIT(0)
>
> +/* Register bits for CFG_P1_TRANSITION (also for P2 and P3) */
> +#define STARTON_SWBUG BIT(7) /* Start on watchdog */
> +#define STARTON_VBUS BIT(5) /* Start on VBUS */
> +#define STARTON_VBAT BIT(4) /* Start on battery insert */
> +#define STARTON_RTC BIT(3) /* Start on RTC */
> +#define STARTON_USB BIT(2) /* Start on USB host */
> +#define STARTON_CHG BIT(1) /* Start on charger */
> +#define STARTON_PWON BIT(0) /* Start on PWRON button */
> +
> #define SEQ_OFFSYNC (1 << 0)
>
> #define PHY_TO_OFF_PM_MASTER(p) (p - 0x36)
> @@ -606,6 +615,44 @@ twl4030_power_configure_resources(const struct
> twl4030_power_data *pdata)
> return 0;
> }
>
> +static int twl4030_starton_mask_and_set(u8 bitmask, u8 bitvalues)
> +{
> + u8 regs[3] = { TWL4030_PM_MASTER_CFG_P1_TRANSITION,
> + TWL4030_PM_MASTER_CFG_P2_TRANSITION,
> + TWL4030_PM_MASTER_CFG_P3_TRANSITION, };
> + u8 val;
> + int i, err;
> +
> + err = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, TWL4030_PM_MASTER_KEY_CFG1,
> + TWL4030_PM_MASTER_PROTECT_KEY);
> + if (err)
> + goto relock;
> + err = twl_i2c_write_u8(TWL_MODULE_PM_MASTER,
> + TWL4030_PM_MASTER_KEY_CFG2,
> + TWL4030_PM_MASTER_PROTECT_KEY);
> + if (err)
> + goto relock;
> +
> + for (i = 0; i < sizeof(regs); i++) {
> + err = twl_i2c_read_u8(TWL_MODULE_PM_MASTER,
> + &val, regs[i]);
> + if (err)
> + break;
> + val = (~bitmask & val) | (bitmask & bitvalues);
> + err = twl_i2c_write_u8(TWL_MODULE_PM_MASTER,
> + val, regs[i]);
> + if (err)
> + break;
> + }
> +
> + if (err)
> + pr_err("TWL4030 Register access failed: %i\n", err);
> +
> +relock:
> + return twl_i2c_write_u8(TWL_MODULE_PM_MASTER, 0,
> + TWL4030_PM_MASTER_PROTECT_KEY);
> +}
> +
> /*
> * In master mode, start the power off sequence.
> * After a successful execution, TWL shuts down the power to the SoC
> @@ -615,6 +662,11 @@ void twl4030_power_off(void)
> {
> int err;
>
> + /* Disable start on charger or VBUS as it can break poweroff */
> + err = twl4030_starton_mask_and_set(STARTON_VBUS | STARTON_CHG, 0);
> + if (err)
> + pr_err("TWL4030 Unable to configure start-up\n");
> +
> err = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, PWR_DEVOFF,
> TWL4030_PM_MASTER_P1_SW_EVENTS);
> if (err)
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
