Hi,
On Sat, Dec 27, 2014 at 03:25:53PM -0600, Felipe Balbi wrote:
> On Sat, Dec 27, 2014 at 07:52:55PM +0200, Aaro Koskinen wrote:
> > Add initial DT support.
> >
> > Signed-off-by: Aaro Koskinen <aaro.koski...@iki.fi>
> > ---
> > Documentation/devicetree/bindings/mfd/menelaus.txt | 30 +++++++++++++
> > drivers/mfd/menelaus.c | 52
> > ++++++++++++++++++++--
> > 2 files changed, 78 insertions(+), 4 deletions(-)
> > create mode 100644 Documentation/devicetree/bindings/mfd/menelaus.txt
> >
> > diff --git a/Documentation/devicetree/bindings/mfd/menelaus.txt
> > b/Documentation/devicetree/bindings/mfd/menelaus.txt
> > new file mode 100644
> > index 0000000..5f69f23
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/mfd/menelaus.txt
> > @@ -0,0 +1,30 @@
> > +Menelaus (Texas Instruments TWL92330) Power Management chip
> > +
> > +Menelaus provides facilities to control the power resources.
> > +
> > +Required properties:
> > +- compatible: must be "menelaus"
> > +- reg: I2C address of the chip
> > +
> > +Optional properties:
> > +- interrupts: the interrupt
> > +- ti,autosleep: All regulators are put to sleep by default.
> > +- ti,vcore-min-microvolt: Range floor for the HW controlled VCORE
> > +- ti,vcore-max-microvolt: Range roof for the HW controlled VCORE
> > +
> > +The use of ti,autosleep is recommended at least on Nokia N800/N810.
> > +
> > +Example:
> > +
> > +&i2c1 {
> > + clock-frequency = <400000>;
> > +
> > + pmic@72 {
> > + compatible = "menelaus";
> > + reg = <0x72>;
> > + interrupts = <7 IRQ_TYPE_EDGE_RISING>;
> > + ti,autosleep;
> > + ti,vcore-min-microvolt = <1050000>;
> > + ti,vcore-max-microvolt = <1400000>;
>
> looks like these should be first converted to actual regulators
> otherwise we will have to maintain this binding forever which means that
> any effort of adding regulator fwk support for menelaus will become a
> lot more difficult because it'll have to cope with the legacy/bogus
> binding.
I was thinking such conversion could be done with incremental patches...
There's basically only one board (n8x0) that uses this and not likely
to be any others. Is there a way to declare bindings unstable?
> I started doing irqchip/irqdomain conversion but I don't have where to
> test and got side-tracked by other stuff. I'll see if I can restart that
> work early next year.
>
> Then, if you change your series so that first you add proper regulator
> fwk support, we should be pretty good with menelaus.
Ok, let's see.
A.
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
