Am 06.01.2015 um 12:52 schrieb Sebastian Reichel:
Hi,
On Tue, Jan 06, 2015 at 12:25:12PM +0100, Peter Kümmel wrote:
Am 05.01.2015 um 16:43 schrieb Felipe Balbi:
Just booted AM335x with CONFIG_PREEMPT and haven't seen any problem.
Perhaps this is something related to another OMAP3-only driver?
Perhaps HSI/SSI ?
I see a ssi error directly before the IN-Band error:
[ 0.339935] platform 48058000.ssi-controller: Cannot lookup hwmod 'ssi'
[ 0.346893] In-band Error seen by MPU at address 0
[ 0.346923] ------------[ cut here ]------------
mh I guess your board's dts included omap36xx.dtsi or omap34xx.dtsi.
Since ssi controller is not available on DM3xxx/AM3xxx (AFAIK) it
should be disabled for those SoCs:
&ssi {
status = "disabled";
};
Indeed, I include omap36xx.dtsi.
Disabling ssi removes ssi the error.
But the In-Band error is still there, so not related to ssi.
I also see these errors:
omap_hwmod: mcbsp2_sidetone using broken dt data from mcbsp
omap_hwmod: mcbsp3_sidetone using broken dt data from mcbsp
omap_hwmod: mcbsp2: cannot be enabled for reset (3)
and
irq: no irq domain found for /ocp/pinmux@48002030 !
Could these errors also be fixed by the dts.
Peter
From what I can see the following in-tree .dts files should be
fixed, too:
* am3517_mt_ventoux.dts
Currently includes "omap34xx.dtsi" instead of "am3517.dtsi".
Apart from that the following boards seem to use omap36xx.dtsi
include, but are actually DM37xx, so they should disable the
ssi block:
* omap3-igep.dtsi
* omap3-lilly-a83x.dtsi
* omap3-overo-storm.dtsi
I will prepare a patch for that later.
-- Sebastian
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
