On 14/01/15 01:46, Paul Walmsley wrote:
> On Wed, 7 Jan 2015, Roger Quadros wrote:
>
>>> From: Paul Walmsley <p...@pwsan.com>
>>> Date: Mon, 5 Jan 2015 15:49:57 -0700
>>> Subject: [PATCH] Only skip ioremap() if IP block does not have OCP header
>>> registers. Experimental.
>>>
>>> ---
>>> arch/arm/mach-omap2/omap_hwmod.c | 33 +++++++++++++++++++++------------
>>> 1 file changed, 21 insertions(+), 12 deletions(-)
>>>
>>> diff --git a/arch/arm/mach-omap2/omap_hwmod.c
>>> b/arch/arm/mach-omap2/omap_hwmod.c
>>> index cbb908dc5cf0..03df8833d399 100644
>>> --- a/arch/arm/mach-omap2/omap_hwmod.c
>>> +++ b/arch/arm/mach-omap2/omap_hwmod.c
>>> @@ -1938,6 +1938,8 @@ static int _reset(struct omap_hwmod *oh)
>>> pr_debug("omap_hwmod: %s: resetting\n", oh->name);
>>>
>>> if (oh->class->reset) {
>>> + WARN(!oh->_mpu_rt_va, "Attempt to call custom reset with no MPU
>>> register target ioremapped: %s",
>>> + oh->name);
>>
>> Not part of $subject.
>
> Hmm, how do you mean? If we skip the ioremap(), wouldn't you like to know
> before some custom reset code gets called that pretty much always depends
> on the ioremap() succeeding? :-)
Ah yes. you are right.
>
>>> r = oh->class->reset(oh);
>>> } else {
>>> if (oh->rst_lines_cnt > 0) {
>>> @@ -2358,15 +2360,19 @@ static int of_dev_hwmod_lookup(struct device_node
>>> *np,
>>> }
>>>
>>> /**
>>> - * _init_mpu_rt_base - populate the virtual address for a hwmod
>>> + * _init_mpu_rt_base - populate the MPU port and virtual address
>>> * @oh: struct omap_hwmod * to locate the virtual address
>>> * @data: (unused, caller should pass NULL)
>>> * @index: index of the reg entry iospace in device tree
>>> * @np: struct device_node * of the IP block's device node in the DT data
>>> *
>>> - * Cache the virtual address used by the MPU to access this IP block's
>>> - * registers. This address is needed early so the OCP registers that
>>> - * are part of the device's address space can be ioremapped properly.
>>> + * Cache the interconnect target port and the virtual address used by
>>> + * the MPU to access this IP block's registers. The address is needed
>>> + * early so the OCP registers that are part of the device's address
>>> + * space can be ioremapped properly. The presence or absence of the
>>> + * interconnect target port also indicates whether the hwmod code
>>> + * should wait for the IP block to indicate readiness after it is
>>> + * enabled.
>>> *
>>> * Returns 0 on success, -EINVAL if an invalid hwmod is passed, and
>>> * -ENXIO on absent or invalid register target address space.
>>> @@ -2385,6 +2391,13 @@ static int __init _init_mpu_rt_base(struct
>>> omap_hwmod *oh, void *data,
>>> if (oh->_int_flags & _HWMOD_NO_MPU_PORT)
>>> return -ENXIO;
>>>
>>> + /*
>>> + * If there's no need for the hwmod code to read or write to
>>> + * the IP block registers, bail out early before the ioremap()
>>> + */
>>> + if (!oh->class->sysc)
>>> + return 0;
>>> +
>>> mem = _find_mpu_rt_addr_space(oh);
>>> if (!mem) {
>>> pr_debug("omap_hwmod: %s: no MPU register target found\n",
>>> @@ -2451,14 +2464,10 @@ static int __init _init(struct omap_hwmod *oh, void
>>> *data)
>>> oh->name, np->name);
>>> }
>>>
>>> - if (oh->class->sysc) {
>>> - r = _init_mpu_rt_base(oh, NULL, index, np);
>>> - if (r < 0) {
>>> - WARN(1, "omap_hwmod: %s: doesn't have mpu register
>>> target base\n",
>>> - oh->name);
>>> - return 0;
>>> - }
>>> - }
>>> + r = _init_mpu_rt_base(oh, NULL, index, np);
>>> + if (r < 0)
>>> + pr_debug("omap_hwmod: %s: doesn't have mpu register target
>>> base\n",
>>> + oh->name);
>>
>> This is the real piece that fixes the issue.
>>
>>>
>>> r = _init_clocks(oh, NULL);
>>> if (r < 0) {
>>>
>>
>> I've tested this patch on am43x-gp-evm, and it seems to fix the issue
>> although with some unpleasant warning messages.
>
> Could you paste those in?
>
I can't reproduce what I saw earlier. Sorry for the noise.
cheers,
-roger
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
