On 1/16/2015 2:50 PM, Tony Lindgren wrote:
Similar to omap_gpio_irq_type() let's make sure that the GPIO
is usable as an interrupt if the platform init code did not
call gpio_request(). Otherwise we can get invalid device access
after setup_irq():
I let Linus W comment on it but IIRC we chewed this issue last
time and the conclusion was the gpio_request() must have to be called
directly or indirectly in case of irq line.
One old thread on possibly similar issue is here[1]
WARNING: CPU: 0 PID: 1 at drivers/bus/omap_l3_noc.c:147
l3_interrupt_handler+0x214/0x340()
44000000.ocp:L3 Custom Error: MASTER MPU TARGET L4CFG (Idle): Data Access in
Supervisor mode during Functional access
...
[<c05f21e4>] (__irq_svc) from [<c05f1974>]
(_raw_spin_unlock_irqrestore+0x34/0x44)
[<c05f1974>] (_raw_spin_unlock_irqrestore) from [<c00914a8>]
(__setup_irq+0x244/0x530)
[<c00914a8>] (__setup_irq) from [<c00917d4>] (setup_irq+0x40/0x8c)
[<c00917d4>] (setup_irq) from [<c0039c8c>] (omap_system_dma_probe+0x1d4/0x2b4)
[<c0039c8c>] (omap_system_dma_probe) from [<c03b2200>]
(platform_drv_probe+0x44/0xa4)
...
We can fix this the same way omap_gpio_irq_type() is handling it.
Note that the long term solution is to change the gpio-omap driver
to handle the banks as separate driver instances. This will allow
us to rely on just runtime PM for tracking the bank specific state.
Reported-by: Russell King <rmk+ker...@arm.linux.org.uk>
Cc: Felipe Balbi <ba...@ti.com>
Cc: Javier Martinez Canillas <jav...@dowhile0.org>
Cc: Kevin Hilman <khil...@kernel.org>
Cc: Linus Walleij <linus.wall...@linaro.org>
Cc: Russell King - ARM Linux <li...@arm.linux.org.uk>
Cc: Santosh Shilimkar <ssant...@kernel.org>
Signed-off-by: Tony Lindgren <t...@atomide.com>
---
drivers/gpio/gpio-omap.c | 39 +++++++++++++++++++++++++++++++++------
1 file changed, 33 insertions(+), 6 deletions(-)
Is it really OMAP specific issue ? On OMAP, clocks needs to enabled for
GPIO's to work which is what the init is doing but I believe the same
should apply to other GPIO controllers as well.
regards,
Santosh
[1] https://lkml.org/lkml/2013/8/27/509
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
