On Fri, 26 Dec 2014, Felipe Balbi wrote:
> STATUS register can be modified by the HW, so we
> should bypass cache because of that.
>
> In the case of INT[12] registers, they are the ones
> that actually clear the IRQ source at the time they
> are read. If we rely on the cache for them, we will
> never be able to clear the interrupt, which will cause
> our IRQ line to be disabled due to IRQ throttling.
>
> Fixes: 44b4dc6 mfd: tps65218: Add driver for the TPS65218 PMIC
> Cc: <sta...@vger.kernel.org> # v3.15+
> Cc: Keerthy <j-keer...@ti.com>
> Cc: Lee Jones <lee.jo...@linaro.org>
> Signed-off-by: Felipe Balbi <ba...@ti.com>
> ---
> drivers/mfd/tps65218.c | 11 +++++++++++
> 1 file changed, 11 insertions(+)
Sorry for the delay. It's difficult to get a WiFi signal 2000m up in
an Austrian mountain. :)
Applied now, thanks.
> diff --git a/drivers/mfd/tps65218.c b/drivers/mfd/tps65218.c
> index 0d256cb..2243f75 100644
> --- a/drivers/mfd/tps65218.c
> +++ b/drivers/mfd/tps65218.c
> @@ -125,10 +125,21 @@ int tps65218_clear_bits(struct tps65218 *tps, unsigned
> int reg,
> }
> EXPORT_SYMBOL_GPL(tps65218_clear_bits);
>
> +static const struct regmap_range tps65218_yes_ranges[] = {
> + regmap_reg_range(TPS65218_REG_INT1, TPS65218_REG_INT2),
> + regmap_reg_range(TPS65218_REG_STATUS, TPS65218_REG_STATUS),
> +};
> +
> +static const struct regmap_access_table tps65218_volatile_table = {
> + .yes_ranges = tps65218_yes_ranges,
> + .n_yes_ranges = ARRAY_SIZE(tps65218_yes_ranges),
> +};
> +
> static struct regmap_config tps65218_regmap_config = {
> .reg_bits = 8,
> .val_bits = 8,
> .cache_type = REGCACHE_RBTREE,
> + .volatile_table = &tps65218_volatile_table,
> };
>
> static const struct regmap_irq tps65218_irqs[] = {
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
