On Mon, Jan 19, 2015 at 07:52:21PM +0200, Roger Quadros wrote: > On this EVM, the USB cable state has to be determined via the > ID pin tied to a GPIO line. We use the gpio-usb-extcon driver > to read the ID pin and the extcon framework to forward > the USB cable state information to the USB driver so the > controller can be configured in the right mode (host/peripheral). > > Gets USB peripheral mode to work on this EVM. > > Signed-off-by: Roger Quadros <rog...@ti.com>
Reviewed-by: Felipe Balbi <ba...@ti.com> Acked-by: Felipe Balbi <ba...@ti.com> > --- > arch/arm/boot/dts/dra72-evm.dts | 31 +++++++++++++++++++++++++++++++ > 1 file changed, 31 insertions(+) > > diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts > index 89085d0..d93a98f 100644 > --- a/arch/arm/boot/dts/dra72-evm.dts > +++ b/arch/arm/boot/dts/dra72-evm.dts > @@ -8,6 +8,7 @@ > /dts-v1/; > > #include "dra72x.dtsi" > +#include <dt-bindings/gpio/gpio.h> > > / { > model = "TI DRA722"; > @@ -24,6 +25,16 @@ > regulator-min-microvolt = <3300000>; > regulator-max-microvolt = <3300000>; > }; > + > + extcon_usb1: extcon_usb1 { > + compatible = "linux,extcon-usb"; > + id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>; > + }; > + > + extcon_usb2: extcon_usb2 { > + compatible = "linux,extcon-usb"; > + id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>; > + }; > }; > > &dra7_pmx_core { > @@ -243,6 +254,18 @@ > ti,palmas-long-press-seconds = <6>; > }; > }; > + > + pcf_gpio_21: gpio@21 { > + compatible = "ti,pcf8575"; > + reg = <0x21>; > + lines-initial-states = <0x1408>; > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-parent = <&gpio6>; > + interrupts = <11 IRQ_TYPE_EDGE_FALLING>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > }; > > &uart1 { > @@ -345,6 +368,14 @@ > phy-supply = <&ldo4_reg>; > }; > > +&omap_dwc3_1 { > + extcon = <&extcon_usb1>; > +}; > + > +&omap_dwc3_2 { > + extcon = <&extcon_usb2>; > +}; > + > &usb1 { > dr_mode = "peripheral"; > pinctrl-names = "default"; > -- > 2.1.0 > -- balbi
signature.asc
Description: Digital signature