On Monday 09 February 2015 12:25:00 Pali Rohár wrote: > On Saturday 31 January 2015 16:29:36 Pali Rohár wrote: > > Hello, > > > > when I enable problematic omap_aes.ko driver (also in DT) > > for Nokia N900 machine in qemu (it emulates OMAP GP device, > > not HS) I get this error message in dmesg at modprobe time: > > > > [ 37.660339] ------------[ cut here ]------------ > > [ 37.663940] WARNING: CPU: 0 PID: 173 at arch/arm/mach- > > omap2/omap_hwmod.c:2182 _idle+0x28/0x64() > > [ 37.668762] omap_hwmod: aes: idle state can only be > > entered from enabled state > > [ 37.672271] Modules linked in: omap_aes(+) > > [ 37.675933] CPU: 0 PID: 173 Comm: modprobe Not tainted > > 3.19.0- rc5+ #299 > > [ 37.679534] Hardware name: Nokia RX-51 board > > [ 37.683227] [<c0012678>] (unwind_backtrace) from > > [<c0010d44>] (show_stack+0x10/0x14) > > [ 37.686920] [<c0010d44>] (show_stack) from [<c0032194>] > > (warn_slowpath_common+0x84/0xac) > > [ 37.690765] [<c0032194>] (warn_slowpath_common) from > > [<c003223c>] (warn_slowpath_fmt+0x2c/0x3c) > > [ 37.694366] [<c003223c>] (warn_slowpath_fmt) from > > [<c0020cb0>] (_idle+0x28/0x64) > > [ 37.698791] [<c0020cb0>] (_idle) from [<c0021078>] > > (omap_hwmod_idle+0x30/0x78) > > [ 37.702636] [<c0021078>] (omap_hwmod_idle) from > > [<c00222c4>] (omap_device_idle+0x48/0x6c) > > [ 37.707153] [<c00222c4>] (omap_device_idle) from > > [<c0022304>] (_od_runtime_suspend+0x1c/0x24) > > [ 37.710723] [<c0022304>] (_od_runtime_suspend) from > > [<c0269680>] (__rpm_callback+0x8c/0xdc) > > [ 37.714385] [<c0269680>] (__rpm_callback) from > > [<c0269740>] (rpm_callback+0x70/0x88) > > [ 37.717987] [<c0269740>] (rpm_callback) from [<c0269f74>] > > (rpm_suspend+0x2e8/0x5a4) > > [ 37.721710] [<c0269f74>] (rpm_suspend) from [<c026a6ec>] > > (__pm_runtime_idle+0x58/0x9c) > > [ 37.725402] [<c026a6ec>] (__pm_runtime_idle) from > > [<bf00129c>] (omap_aes_probe+0x15c/0x448 [omap_aes]) > > [ 37.733489] [<bf00129c>] (omap_aes_probe [omap_aes]) from > > [<c0263d78>] (platform_drv_probe+0x48/0x90) > > [ 37.740936] [<c0263d78>] (platform_drv_probe) from > > [<c02624ec>] (really_probe+0xac/0x1e0) > > [ 37.745025] [<c02624ec>] (really_probe) from [<c0262718>] > > (driver_probe_device+0x30/0x48) > > [ 37.749847] [<c0262718>] (driver_probe_device) from > > [<c0262790>] (__driver_attach+0x60/0x84) > > [ 37.753601] [<c0262790>] (__driver_attach) from > > [<c0261070>] (bus_for_each_dev+0x50/0x84) > > [ 37.758422] [<c0261070>] (bus_for_each_dev) from > > [<c0261e20>] (bus_add_driver+0xac/0x1bc) > > [ 37.762207] [<c0261e20>] (bus_add_driver) from > > [<c02630c8>] (driver_register+0x9c/0xe0) > > [ 37.765899] [<c02630c8>] (driver_register) from > > [<c0008798>] (do_one_initcall+0x100/0x1b0) > > [ 37.769653] [<c0008798>] (do_one_initcall) from > > [<c0085ca4>] (do_init_module+0x34/0x158) > > [ 37.773590] [<c0085ca4>] (do_init_module) from > > [<c00868d8>] (SyS_init_module+0x54/0x64) > > [ 37.777252] [<c00868d8>] (SyS_init_module) from > > [<c000dbe0>] (ret_fast_syscall+0x0/0x30) > > [ 37.780975] ---[ end trace 86c3e025b92e700d ]--- > > [ 37.784667] omap-aes 480c5000.aes: OMAP AES hw accel rev: > > 0.0 [ 37.789794] of_dma_request_slave_channel: dma-names > > property of node '/ocp/aes@480c5000' missing or empty > > [ 37.797668] omap-aes 480c5000.aes: Unable to request in > > DMA channel > > [ 37.801391] omap_aes_dma_init: error: -12 > > > > Error is not fatal, kernel does not crash and qemu emulation > > working fine. But error is there. > > > > I'm sure that qemu does not support omap aes hw emulation > > and so I except error message about missing hw part (or > > something else). But not above unwind_backtrace error > > message. > > > > Any idea why it happens? It is probably not related to AES > > but to DMA. It is for OMAP GP device (but emulated), so can > > TI comment this problem (as this is not HS under NDA)? > > Hello, > > what does that error line means? > > [ 37.668762] omap_hwmod: aes: idle state can only be entered > from enabled state > > Is not it bug in omap_hwmod.c code?
In qemu dmesg log I see this debug line: [ 0.297851] omap_hwmod: aes: cannot be enabled for reset (3) So aes is in disabled state. Should not omap-aes driver check for aes state if is enabled? -- Pali Rohár pali.ro...@gmail.com
signature.asc
Description: This is a digitally signed message part.