Hi! > + /* ichg values in uA. If any are 'large', we set CGAIN to > + * '1' which doubles the range for half the precision. > + */ > + int ichg_eoc, ichg_lo, ichg_hi, cur;
We should really get uA_t. [Plus, this is not kernel comment style, but...] > + /* For ichg_eoc, reg value must be 100XXXX000, we only > + * set the XXXX in high nibble. > + */ Confused. High nibble is 0xf0, right? > + /* And finally, set the current. This is stored in > + * two registers. */ > + reg = ua2regval(bci->cur, cgain); > + /* we have only 10 bit */ bits > @@ -562,6 +698,14 @@ static int __init twl4030_bci_probe(struct > platform_device *pdev) > if (!pdata) > pdata = twl4030_bci_parse_dt(&pdev->dev); > > + bci->ichg_eoc = 80100; /* Stop charging when current drops to here */ > + bci->ichg_lo = 241000; /* low threshold */ Low > + bci->ichg_hi = 500000; /* High threshold */ Acked-by: Pavel Machek <pa...@ucw.cz> -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
