Hi!
According to n900 dts, twl4030-bci (aka charger) should be included.
(But it does not seem to do anything useful on n900. I was hoping for
measurement of input voltage, but .. no.)
Any ideas why the patch below is needed?
Signed-off-by: Pavel Machek <pa...@ucw.cz>
diff --git a/drivers/power/twl4030_charger.c b/drivers/power/twl4030_charger.c
index d35b83e..96bbbe9 100644
--- a/drivers/power/twl4030_charger.c
+++ b/drivers/power/twl4030_charger.c
@@ -714,6 +722,7 @@ static const struct of_device_id twl_bci_of_match[] = {
MODULE_DEVICE_TABLE(of, twl_bci_of_match);
static struct platform_driver twl4030_bci_driver = {
+ .probe = twl4030_bci_probe,
.driver = {
.name = "twl4030_bci",
.of_match_table = of_match_ptr(twl_bci_of_match),
@@ -721,7 +730,7 @@ static struct platform_driver twl4030_bci_driver = {
.remove = __exit_p(twl4030_bci_remove),
};
-module_platform_driver_probe(twl4030_bci_driver, twl4030_bci_probe);
+module_platform_driver(twl4030_bci_driver);
MODULE_AUTHOR("Gražvydas Ignotas");
MODULE_DESCRIPTION("TWL4030 Battery Charger Interface driver");
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures)
http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
