Hello.
On 3/19/2015 1:48 AM, Tony Lindgren wrote:
Looks like dm81xx can only do 32-bit fifo reads like am35x. Let's set
up musb-dsps with a custom read_fifo function based on the compatible
flag.
Otherwise we can get the following errors when starting dhclient on a
asix USB Ethernet adapter:
asix 2-1:1.0 eth2: asix_rx_fixup() Bad Header Length 0xffff003c, offset 4
While at it, let's also remove pointless cast of the driver data.
Cc: Bin Liu <binml...@gmail.com>
Cc: Brian Hutchinson <b.hutch...@gmail.com>
Cc: George Cherian <george.cher...@ti.com>
Signed-off-by: Tony Lindgren <t...@atomide.com>
---
drivers/usb/musb/musb_dsps.c | 37 ++++++++++++++++++++++++++++++++++++-
1 file changed, 36 insertions(+), 1 deletion(-)
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -655,6 +655,36 @@ static int dsps_musb_reset(struct musb *musb)
return !session_restart;
}
+/* Similar to am35x, dm81xx support only 32-bit read operation */
+static void dsps_read_fifo32(struct musb_hw_ep *hw_ep, u16 len, u8 *dst)
+{
+ void __iomem *fifo = hw_ep->fifo;
+ u32 val;
+ int i;
+
+ /* Read for 32bit-aligned destination address */
+ if (likely((0x03 & (unsigned long)dst) == 0) && len >= 4) {
+ readsl(fifo, dst, len >> 2);
+ dst += len & ~0x03;
+ len &= 0x03;
+ }
+ /*
+ * Now read the remaining 1 to 3 byte or complete length if
+ * unaligned address.
+ */
This comment seems misplaced, it belongs before the next *if*.
+ if (len > 4) {
+ for (i = 0; i < (len >> 2); i++) {
+ *(u32 *)dst = musb_readl(fifo, 0);
+ dst += 4;
+ }
Not sure how this is different to using readsl().
+ len &= 0x03;
+ }
+ if (len > 0) {
+ val = musb_readl(fifo, 0);
+ memcpy(dst, &val, len);
+ }
+}
+
static struct musb_platform_ops dsps_ops = {
.quirks = MUSB_INDEXED_EP,
.init = dsps_musb_init,
[...]
WBR, Sergei
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
