Add the device tree bindings document for the TI Wakeup M3 remote
processor devices on AM33xx and AM43xx SoCs. These devices are used
to offload low-level power management functionality, and are handled
by the wkup_m3 remoteproc driver.
Signed-off-by: Suman Anna <s-a...@ti.com>
Signed-off-by: Dave Gerlach <d-gerl...@ti.com>
---
.../bindings/remoteproc/wkup_m3_rproc.txt | 52 ++++++++++++++++++++++
1 file changed, 52 insertions(+)
create mode 100644
Documentation/devicetree/bindings/remoteproc/wkup_m3_rproc.txt
diff --git a/Documentation/devicetree/bindings/remoteproc/wkup_m3_rproc.txt
b/Documentation/devicetree/bindings/remoteproc/wkup_m3_rproc.txt
new file mode 100644
index 0000000..3a70073
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/wkup_m3_rproc.txt
@@ -0,0 +1,52 @@
+TI Wakeup M3 Remoteproc Driver
+==============================
+
+The TI AM33xx and AM43xx family of devices use a small Cortex M3 co-processor
+(commonly referred to as Wakeup M3 or CM3) to help with various low power tasks
+that cannot be controlled from the MPU. This CM3 processor requires a firmware
+binary to accomplish this. The wkup_m3 remoteproc driver handles the loading of
+the firmware and booting of the CM3.
+
+Wkup M3 Device Node:
+====================
+A wkup_m3 device node is used to represent the Wakeup M3 processor instance
+within the SoC. It is added as a child node of the parent interconnect bus
+(l4_wkup) through which it is accessible to the MPU.
+
+Required properties:
+--------------------
+- compatible: Should be one of,
+ "ti,am3352-wkup-m3" for AM33xx SoCs
+ "ti,am4372-wkup-m3" for AM43xx SoCs
+- reg: Should contain the address ranges for the two internal
+ memory regions, UMEM and DMEM. The parent node should
+ provide an appropriate ranges property for properly
+ translating these into bus addresses.
+- reg-names: Contains the corresponding names for the two memory
+ regions. These should be named "umem" & "dmem".
+- ti,hwmods: Name of the hwmod associated with the wkupm3 device.
+- ti,pm-firmware: Name of firmware file to be used for loading and
+ booting the wkup_m3 remote processor.
+
+Example:
+--------
+/* AM33xx */
+ocp {
+ l4_wkup: l4_wkup@44c00000 {
+ compatible = "am335-l4-wkup", "simple-bus";
+ ranges = <0 0x44c00000 0x400000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ wkup_m3: wkup_m3@100000 {
+ compatible = "ti,am3352-wkup-m3";
+ reg = <0x100000 0x4000>,
+ <0x180000 0x2000>;
+ reg-names = "umem", "dmem";
+ ti,hwmods = "wkup_m3";
+ ti,pm-firmware = "am335x-pm-firmware.elf";
+ };
+ };
+
+ ...
+};
--
2.3.0
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
