Change interrupt numbering for sparse IRQ. We do this using
a fixed offset until we can drop irqs.h once all it's users
have been updated.
Note that this depends on the GPIO fix for the MPUIO IRQs
"gpio: omap: Fix regression for MPUIO interrupts".
Also note that this patch adds some extra irq alloc warnings
that will go away when we stop calling irq_alloc_descs
in gpio-omap.c with a follow-up patch.
Cc: Aaro Koskinen <aaro.koski...@iki.fi>
Signed-off-by: Tony Lindgren <t...@atomide.com>
---
arch/arm/Kconfig | 1 +
arch/arm/mach-omap1/ams-delta-fiq-handler.S | 3 +-
arch/arm/mach-omap1/dma.c | 2 +-
arch/arm/mach-omap1/i2c.c | 3 +-
arch/arm/mach-omap1/include/mach/irqs.h | 124 ++++++++++++++--------------
arch/arm/mach-omap1/include/mach/soc.h | 4 +
arch/arm/mach-omap1/irq.c | 1 +
arch/arm/mach-omap1/timer.c | 4 +-
arch/arm/plat-omap/dma.c | 4 +
9 files changed, 75 insertions(+), 71 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 881a76c..6a23dac 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -755,6 +755,7 @@ config ARCH_OMAP1
select MULTI_IRQ_HANDLER
select NEED_MACH_IO_H if PCCARD
select NEED_MACH_MEMORY_H
+ select SPARSE_IRQ
help
Support for older TI OMAP1 (omap7xx, omap15xx or omap16xx)
diff --git a/arch/arm/mach-omap1/ams-delta-fiq-handler.S
b/arch/arm/mach-omap1/ams-delta-fiq-handler.S
index 3d1e1c2..5d7fb59 100644
--- a/arch/arm/mach-omap1/ams-delta-fiq-handler.S
+++ b/arch/arm/mach-omap1/ams-delta-fiq-handler.S
@@ -17,11 +17,10 @@
#include <asm/assembler.h>
#include <mach/board-ams-delta.h>
-
-#include <mach/irqs.h>
#include <mach/ams-delta-fiq.h>
#include "iomap.h"
+#include "soc.h"
/*
* GPIO related definitions, copied from arch/arm/plat-omap/gpio.c.
diff --git a/arch/arm/mach-omap1/dma.c b/arch/arm/mach-omap1/dma.c
index 4be601b6..7b02ed2 100644
--- a/arch/arm/mach-omap1/dma.c
+++ b/arch/arm/mach-omap1/dma.c
@@ -28,7 +28,7 @@
#include <linux/omap-dma.h>
#include <mach/tc.h>
-#include <mach/irqs.h>
+#include "soc.h"
#define OMAP1_DMA_BASE (0xfffed800)
#define OMAP1_LOGICAL_DMA_CH_COUNT 17
diff --git a/arch/arm/mach-omap1/i2c.c b/arch/arm/mach-omap1/i2c.c
index 7f5761c..82887d6 100644
--- a/arch/arm/mach-omap1/i2c.c
+++ b/arch/arm/mach-omap1/i2c.c
@@ -27,7 +27,6 @@
#define OMAP_I2C_SIZE 0x3f
#define OMAP1_I2C_BASE 0xfffb3800
-#define OMAP1_INT_I2C (32 + 4)
static const char name[] = "omap_i2c";
@@ -67,7 +66,7 @@ int __init omap_i2c_add_bus(struct omap_i2c_bus_platform_data
*pdata,
res[0].start = OMAP1_I2C_BASE;
res[0].end = res[0].start + OMAP_I2C_SIZE;
res[0].flags = IORESOURCE_MEM;
- res[1].start = OMAP1_INT_I2C;
+ res[1].start = INT_I2C;
res[1].flags = IORESOURCE_IRQ;
pdev->resource = res;
diff --git a/arch/arm/mach-omap1/include/mach/irqs.h
b/arch/arm/mach-omap1/include/mach/irqs.h
index 729992d..9050085 100644
--- a/arch/arm/mach-omap1/include/mach/irqs.h
+++ b/arch/arm/mach-omap1/include/mach/irqs.h
@@ -34,84 +34,84 @@
* NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
*
*/
-#define INT_CAMERA 1
-#define INT_FIQ 3
-#define INT_RTDX 6
-#define INT_DSP_MMU_ABORT 7
-#define INT_HOST 8
-#define INT_ABORT 9
-#define INT_BRIDGE_PRIV 13
-#define INT_GPIO_BANK1 14
-#define INT_UART3 15
-#define INT_TIMER3 16
-#define INT_DMA_CH0_6 19
-#define INT_DMA_CH1_7 20
-#define INT_DMA_CH2_8 21
-#define INT_DMA_CH3 22
-#define INT_DMA_CH4 23
-#define INT_DMA_CH5 24
-#define INT_TIMER1 26
-#define INT_WD_TIMER 27
-#define INT_BRIDGE_PUB 28
-#define INT_TIMER2 30
-#define INT_LCD_CTRL 31
+#define INT_CAMERA (NR_IRQS_LEGACY + 1)
+#define INT_FIQ (NR_IRQS_LEGACY + 3)
+#define INT_RTDX (NR_IRQS_LEGACY + 6)
+#define INT_DSP_MMU_ABORT (NR_IRQS_LEGACY + 7)
+#define INT_HOST (NR_IRQS_LEGACY + 8)
+#define INT_ABORT (NR_IRQS_LEGACY + 9)
+#define INT_BRIDGE_PRIV (NR_IRQS_LEGACY + 13)
+#define INT_GPIO_BANK1 (NR_IRQS_LEGACY + 14)
+#define INT_UART3 (NR_IRQS_LEGACY + 15)
+#define INT_TIMER3 (NR_IRQS_LEGACY + 16)
+#define INT_DMA_CH0_6 (NR_IRQS_LEGACY + 19)
+#define INT_DMA_CH1_7 (NR_IRQS_LEGACY + 20)
+#define INT_DMA_CH2_8 (NR_IRQS_LEGACY + 21)
+#define INT_DMA_CH3 (NR_IRQS_LEGACY + 22)
+#define INT_DMA_CH4 (NR_IRQS_LEGACY + 23)
+#define INT_DMA_CH5 (NR_IRQS_LEGACY + 24)
+#define INT_TIMER1 (NR_IRQS_LEGACY + 26)
+#define INT_WD_TIMER (NR_IRQS_LEGACY + 27)
+#define INT_BRIDGE_PUB (NR_IRQS_LEGACY + 28)
+#define INT_TIMER2 (NR_IRQS_LEGACY + 30)
+#define INT_LCD_CTRL (NR_IRQS_LEGACY + 31)
/*
* OMAP-1510 specific IRQ numbers for interrupt handler 1
*/
-#define INT_1510_IH2_IRQ 0
-#define INT_1510_RES2 2
-#define INT_1510_SPI_TX 4
-#define INT_1510_SPI_RX 5
-#define INT_1510_DSP_MAILBOX1 10
-#define INT_1510_DSP_MAILBOX2 11
-#define INT_1510_RES12 12
-#define INT_1510_LB_MMU 17
-#define INT_1510_RES18 18
-#define INT_1510_LOCAL_BUS 29
+#define INT_1510_IH2_IRQ (NR_IRQS_LEGACY + 0)
+#define INT_1510_RES2 (NR_IRQS_LEGACY + 2)
+#define INT_1510_SPI_TX (NR_IRQS_LEGACY + 4)
+#define INT_1510_SPI_RX (NR_IRQS_LEGACY + 5)
+#define INT_1510_DSP_MAILBOX1 (NR_IRQS_LEGACY + 10)
+#define INT_1510_DSP_MAILBOX2 (NR_IRQS_LEGACY + 11)
+#define INT_1510_RES12 (NR_IRQS_LEGACY + 12)
+#define INT_1510_LB_MMU (NR_IRQS_LEGACY + 17)
+#define INT_1510_RES18 (NR_IRQS_LEGACY + 18)
+#define INT_1510_LOCAL_BUS (NR_IRQS_LEGACY + 29)
/*
* OMAP-1610 specific IRQ numbers for interrupt handler 1
*/
#define INT_1610_IH2_IRQ INT_1510_IH2_IRQ
-#define INT_1610_IH2_FIQ 2
-#define INT_1610_McBSP2_TX 4
-#define INT_1610_McBSP2_RX 5
-#define INT_1610_DSP_MAILBOX1 10
-#define INT_1610_DSP_MAILBOX2 11
-#define INT_1610_LCD_LINE 12
-#define INT_1610_GPTIMER1 17
-#define INT_1610_GPTIMER2 18
-#define INT_1610_SSR_FIFO_0 29
+#define INT_1610_IH2_FIQ (NR_IRQS_LEGACY + 2)
+#define INT_1610_McBSP2_TX (NR_IRQS_LEGACY + 4)
+#define INT_1610_McBSP2_RX (NR_IRQS_LEGACY + 5)
+#define INT_1610_DSP_MAILBOX1 (NR_IRQS_LEGACY + 10)
+#define INT_1610_DSP_MAILBOX2 (NR_IRQS_LEGACY + 11)
+#define INT_1610_LCD_LINE (NR_IRQS_LEGACY + 12)
+#define INT_1610_GPTIMER1 (NR_IRQS_LEGACY + 17)
+#define INT_1610_GPTIMER2 (NR_IRQS_LEGACY + 18)
+#define INT_1610_SSR_FIFO_0 (NR_IRQS_LEGACY + 29)
/*
* OMAP-7xx specific IRQ numbers for interrupt handler 1
*/
-#define INT_7XX_IH2_FIQ 0
-#define INT_7XX_IH2_IRQ 1
-#define INT_7XX_USB_NON_ISO 2
-#define INT_7XX_USB_ISO 3
-#define INT_7XX_ICR 4
-#define INT_7XX_EAC 5
-#define INT_7XX_GPIO_BANK1 6
-#define INT_7XX_GPIO_BANK2 7
-#define INT_7XX_GPIO_BANK3 8
-#define INT_7XX_McBSP2TX 10
-#define INT_7XX_McBSP2RX 11
-#define INT_7XX_McBSP2RX_OVF 12
-#define INT_7XX_LCD_LINE 14
-#define INT_7XX_GSM_PROTECT 15
-#define INT_7XX_TIMER3 16
-#define INT_7XX_GPIO_BANK5 17
-#define INT_7XX_GPIO_BANK6 18
-#define INT_7XX_SPGIO_WR 29
+#define INT_7XX_IH2_FIQ (NR_IRQS_LEGACY + 0)
+#define INT_7XX_IH2_IRQ (NR_IRQS_LEGACY + 1)
+#define INT_7XX_USB_NON_ISO (NR_IRQS_LEGACY + 2)
+#define INT_7XX_USB_ISO (NR_IRQS_LEGACY + 3)
+#define INT_7XX_ICR (NR_IRQS_LEGACY + 4)
+#define INT_7XX_EAC (NR_IRQS_LEGACY + 5)
+#define INT_7XX_GPIO_BANK1 (NR_IRQS_LEGACY + 6)
+#define INT_7XX_GPIO_BANK2 (NR_IRQS_LEGACY + 7)
+#define INT_7XX_GPIO_BANK3 (NR_IRQS_LEGACY + 8)
+#define INT_7XX_McBSP2TX (NR_IRQS_LEGACY + 10)
+#define INT_7XX_McBSP2RX (NR_IRQS_LEGACY + 11)
+#define INT_7XX_McBSP2RX_OVF (NR_IRQS_LEGACY + 12)
+#define INT_7XX_LCD_LINE (NR_IRQS_LEGACY + 14)
+#define INT_7XX_GSM_PROTECT (NR_IRQS_LEGACY + 15)
+#define INT_7XX_TIMER3 (NR_IRQS_LEGACY + 16)
+#define INT_7XX_GPIO_BANK5 (NR_IRQS_LEGACY + 17)
+#define INT_7XX_GPIO_BANK6 (NR_IRQS_LEGACY + 18)
+#define INT_7XX_SPGIO_WR (NR_IRQS_LEGACY + 29)
/*
* IRQ numbers for interrupt handler 2
*
* NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
*/
-#define IH2_BASE 32
+#define IH2_BASE (NR_IRQS_LEGACY + 32)
#define INT_KEYBOARD (1 + IH2_BASE)
#define INT_uWireTX (2 + IH2_BASE)
@@ -255,11 +255,7 @@
#endif
#define OMAP_FPGA_IRQ_END (OMAP_FPGA_IRQ_BASE + OMAP_FPGA_NR_IRQS)
-#define NR_IRQS OMAP_FPGA_IRQ_END
-
-#define OMAP_IRQ_BIT(irq) (1 << ((irq) % 32))
-
-#include <mach/hardware.h>
+#define OMAP_IRQ_BIT(irq) (1 << ((irq - NR_IRQS_LEGACY) % 32))
#ifdef CONFIG_FIQ
#define FIQ_START 1024
diff --git a/arch/arm/mach-omap1/include/mach/soc.h
b/arch/arm/mach-omap1/include/mach/soc.h
index 612bd1cc..3d93557 100644
--- a/arch/arm/mach-omap1/include/mach/soc.h
+++ b/arch/arm/mach-omap1/include/mach/soc.h
@@ -28,6 +28,10 @@
#ifndef __ASM_ARCH_OMAP_CPU_H
#define __ASM_ARCH_OMAP_CPU_H
+#include <asm/irq.h>
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+
#ifndef __ASSEMBLY__
#include <linux/bitops.h>
diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c
index 567fba3..f4d346f 100644
--- a/arch/arm/mach-omap1/irq.c
+++ b/arch/arm/mach-omap1/irq.c
@@ -233,6 +233,7 @@ void __init omap1_init_irq(void)
irq_base = 0;
}
omap_l2_irq = cpu_is_omap7xx() ? irq_base + 1 : irq_base;
+ omap_l2_irq -= NR_IRQS_LEGACY;
domain = irq_domain_add_legacy(NULL, nr_irqs, irq_base, 0,
&irq_domain_simple_ops, NULL);
diff --git a/arch/arm/mach-omap1/timer.c b/arch/arm/mach-omap1/timer.c
index bde7a35..06c5ba7 100644
--- a/arch/arm/mach-omap1/timer.c
+++ b/arch/arm/mach-omap1/timer.c
@@ -27,10 +27,10 @@
#include <linux/platform_device.h>
#include <linux/platform_data/dmtimer-omap.h>
-#include <mach/irqs.h>
-
#include <plat/dmtimer.h>
+#include "soc.h"
+
#define OMAP1610_GPTIMER1_BASE 0xfffb1400
#define OMAP1610_GPTIMER2_BASE 0xfffb1c00
#define OMAP1610_GPTIMER3_BASE 0xfffb2400
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 6416e03..1e460b4 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -38,6 +38,10 @@
#include <linux/omap-dma.h>
+#ifdef CONFIG_ARCH_OMAP1
+#include <mach/soc.h>
+#endif
+
/*
* MAX_LOGICAL_DMA_CH_COUNT: the maximum number of logical DMA
* channels that an instance of the SDMA IP block can support. Used
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
