On 05/20/2015 04:07 PM, Sebastian Andrzej Siewior wrote:
> The currently in-use port->startup and port->shutdown are "okay". The
> startup part for instance does the tiny omap extra part and invokes
> serial8250_do_startup() for the remaining pieces. The workflow in
> serial8250_do_startup() is okay except for the part where UART_RX is
> read without a check if there is something to read. I tried to
> workaround it in commit 0aa525d11859 ("tty: serial: 8250_core: read only
> RX if there is something in the FIFO") but then reverted it later in
> commit ca8bb4aefb9 ("serial: 8250: Revert "tty: serial: 8250_core: read
> only RX if there is something in the FIFO"").
>
> This is the second attempt to get it to work on older OMAPs without
> breaking other chips this time
> Peter Hurley suggested to pull in the few needed lines from
> serial8250_do_startup() and drop everything else that is not required
> including making it simpler like using just request_irq() instead the
> chain handler like it is doing now.
> So lets try that.
Thanks, Sebastian.
Reviewed-by: Peter Hurley <pe...@hurleysoftware.com>
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
