scm_conf1 maps the control register address space after the
padconf till the end.
Fix the scm_conf and pmx_core resource lengths. We need to add
4 bytes to include the last 32-bit register space.
Remove the redundant dra7_ctrl_core and dra7_ctrl_general nodes.
They are not used by anyone and no longer needed as they are
covered by scm_conf and scm_conf1.
Signed-off-by: Roger Quadros <rog...@ti.com>
---
arch/arm/boot/dts/dra7.dtsi | 19 ++++++++-----------
1 file changed, 8 insertions(+), 11 deletions(-)
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 4a0718c..d07c34c 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -141,7 +141,7 @@
dra7_pmx_core: pinmux@1400 {
compatible = "ti,dra7-padconf",
"pinctrl-single";
- reg = <0x1400 0x0464>;
+ reg = <0x1400 0x0468>;
#address-cells = <1>;
#size-cells = <0>;
#interrupt-cells = <1>;
@@ -149,6 +149,13 @@
pinctrl-single,register-width = <32>;
pinctrl-single,function-mask =
<0x3fffffff>;
};
+
+ scm_conf1: scm_conf@1 {
+ compatible = "syscon";
+ reg = <0x1868 0x03e0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
};
cm_core_aon: cm_core_aon@5000 {
@@ -286,16 +293,6 @@
#thermal-sensor-cells = <1>;
};
- dra7_ctrl_core: ctrl_core@4a002000 {
- compatible = "syscon";
- reg = <0x4a002000 0x6d0>;
- };
-
- dra7_ctrl_general: tisyscon@4a002e00 {
- compatible = "syscon";
- reg = <0x4a002e00 0x7c>;
- };
-
sdma: dma-controller@4a056000 {
compatible = "ti,omap4430-sdma";
reg = <0x4a056000 0x1000>;
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
