On 26 August 2015 at 16:38, Felipe Balbi <ba...@ti.com> wrote: > Hi, > > On Wed, Aug 26, 2015 at 04:29:52PM -0300, Ezequiel Garcia wrote: >> Felipe, >> >> On 25 August 2015 at 16:58, Felipe Balbi <ba...@ti.com> wrote: >> > Hi Ingo, >> > >> > I'm facing an issue with CONFIG_DEBUG_SHIRQ and pm_runtime when using >> > devm_request_*irq(). >> > >> >> I may be jumping on the gun here, but I believe here's your problem. >> Using devm_request_irq with shared IRQs is not a good idea. >> >> Or at least, it forces you to handle interrupts after your device >> is _completely_ removed (e.g. your IRQ cookie could be bogus). >> >> AFAICS, the CONFIG_DEBUG_SHIRQ option is just triggering a couple >> spurious interrupts, that are expected to happen anyway. >> >> Your IRQ is shared, and so you may get any IRQ at any time, >> coming from another device (not yours). >> >> So, if I'm right, my suggestion is simple: use request_irq/free_irq >> and free your IRQ before you disable your clocks, remove your device, >> etc. > > yeah, that's just a workaround though. Specially with IRQ flags coming > from DT, driver might have no knowledge that its IRQ is shared to start > with. >
Really? Is there any way the DT can set the IRQF_SHARED flag? The caller of devm_request_irq / request_irq needs to pass the irqflags, so I'd say the driver is perfectly aware of the IRQ being shared or not. Maybe you can clarify what I'm missing here. > Besides, removing devm_* is just a workaround to the real problem. It > seems, to me at least, that drivers shouldn't be calling > pm_runtime_put_sync(); pm_runtime_disable() from their ->remove(), > rather the bus driver should be responsible for doing so; much > usb_bus_type and pci_bus_type do. Of course, this has the side effect of > requiring buses to make sure that by the time ->probe() is called, that > device's clocks are stable and running and the device is active. > > However, that's not done today for the platform_bus_type and, frankly, > that would be somewhat of a complex problem to solve, considering that > different SoCs integrate IPs the way they want. > > Personally, I think removing devm_* is but a workaround to the real > thing we're dealing with. > I don't see any problems here: if your interrupt is shared, then you must be prepared to handle it any time, coming from any sources (not only your device). And CONFIG_DEBUG_SHIRQ does exactly that, in order to make sure all the drivers passing IRQF_SHARED comply with that rule. So you either avoid using devm_request_irq, or you prepare your handler accordingly to be ready to handle an interrupt _any time_. -- Ezequiel GarcĂa, VanguardiaSur www.vanguardiasur.com.ar -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html