We have access to dev, so it is better to use the dev_dbg for debug prints.

Signed-off-by: Peter Ujfalusi <peter.ujfal...@ti.com>
---
 drivers/dma/edma.c | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

diff --git a/drivers/dma/edma.c b/drivers/dma/edma.c
index 87fc83800606..ed67206626e9 100644
--- a/drivers/dma/edma.c
+++ b/drivers/dma/edma.c
@@ -655,14 +655,14 @@ static int edma_start(struct edma_cc *ecc, unsigned 
channel)
 
                /* EDMA channels without event association */
                if (test_bit(channel, ecc->edma_unused)) {
-                       pr_debug("EDMA: ESR%d %08x\n", j,
-                                edma_shadow0_read_array(ecc, SH_ESR, j));
+                       dev_dbg(ecc->dev, "ESR%d %08x\n", j,
+                               edma_shadow0_read_array(ecc, SH_ESR, j));
                        edma_shadow0_write_array(ecc, SH_ESR, j, mask);
                        return 0;
                }
 
                /* EDMA channel with event association */
-               pr_debug("EDMA: ER%d %08x\n", j,
+               dev_dbg(ecc->dev, "ER%d %08x\n", j,
                        edma_shadow0_read_array(ecc, SH_ER, j));
                /* Clear any pending event or error */
                edma_write_array(ecc, EDMA_ECR, j, mask);
@@ -670,8 +670,8 @@ static int edma_start(struct edma_cc *ecc, unsigned channel)
                /* Clear any SER */
                edma_shadow0_write_array(ecc, SH_SECR, j, mask);
                edma_shadow0_write_array(ecc, SH_EESR, j, mask);
-               pr_debug("EDMA: EER%d %08x\n", j,
-                        edma_shadow0_read_array(ecc, SH_EER, j));
+               dev_dbg(ecc->dev, "EER%d %08x\n", j,
+                       edma_shadow0_read_array(ecc, SH_EER, j));
                return 0;
        }
 
@@ -709,8 +709,8 @@ static void edma_stop(struct edma_cc *ecc, unsigned channel)
                /* clear possibly pending completion interrupt */
                edma_shadow0_write_array(ecc, SH_ICR, j, mask);
 
-               pr_debug("EDMA: EER%d %08x\n", j,
-                        edma_shadow0_read_array(ecc, SH_EER, j));
+               dev_dbg(ecc->dev, "EER%d %08x\n", j,
+                       edma_shadow0_read_array(ecc, SH_EER, j));
 
                /* REVISIT:  consider guarding against inappropriate event
                 * chaining by overwriting with dummy_paramset.
@@ -779,8 +779,8 @@ static int edma_trigger_channel(struct edma_cc *ecc, 
unsigned channel)
 
        edma_shadow0_write_array(ecc, SH_ESR, (channel >> 5), mask);
 
-       pr_debug("EDMA: ESR%d %08x\n", (channel >> 5),
-                edma_shadow0_read_array(ecc, SH_ESR, (channel >> 5)));
+       dev_dbg(ecc->dev, "ESR%d %08x\n", (channel >> 5),
+               edma_shadow0_read_array(ecc, SH_ESR, (channel >> 5)));
        return 0;
 }
 
@@ -810,8 +810,8 @@ static void edma_clean_channel(struct edma_cc *ecc, 
unsigned channel)
                int j = (channel >> 5);
                unsigned int mask = BIT(channel & 0x1f);
 
-               pr_debug("EDMA: EMR%d %08x\n", j,
-                        edma_read_array(ecc, EDMA_EMR, j));
+               dev_dbg(ecc->dev, "EMR%d %08x\n", j,
+                       edma_read_array(ecc, EDMA_EMR, j));
                edma_shadow0_write_array(ecc, SH_ECR, j, mask);
                /* Clear the corresponding EMR bits */
                edma_write_array(ecc, EDMA_EMCR, j, mask);
-- 
2.5.1

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to