Hi Tero,
On Thursday 24 September 2015 07:56 PM, Tero Kristo wrote:
> Add reset data for pruss, gfx, wkup-m3 and system reset.
>
> Signed-off-by: Tero Kristo <t-kri...@ti.com>
> ---
> arch/arm/boot/dts/am4372.dtsi | 24 ++++++++++++++++++++++++
> 1 file changed, 24 insertions(+)
>
> diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
> index 0447c04a..fcc8d31 100644
> --- a/arch/arm/boot/dts/am4372.dtsi
> +++ b/arch/arm/boot/dts/am4372.dtsi
> @@ -116,12 +116,15 @@
> reg-names = "umem", "dmem";
> ti,hwmods = "wkup_m3";
> ti,pm-firmware = "am335x-pm-firmware.elf";
> + reset-names = "wkup_m3";
> + resets = <&prcm 0x2000 0x10 3 0x14 5>;
> };
>
> prcm: prcm@1f0000 {
> compatible = "ti,am4-prcm";
> reg = <0x1f0000 0x11000>;
> interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
> + #reset-cells = <5>;
>
> prcm_clocks: clocks {
> #address-cells = <1>;
> @@ -130,6 +133,12 @@
>
> prcm_clockdomains: clockdomains {
> };
> +
> + system_reset: system_reset {
> + compatible = "ti,system-reset";
> + reset-names = "system";
> + reset-cells = <&prcm 0x4000 0 0 4 0>;
This should be resets instead of reset-cells.
With this change, reboot is functional on AM437x GP evm.
Thanks and regards,
Lokesh
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
