On 09/30/2015 01:37 AM, Suman Anna wrote:
The default clock enabling functions for TI clocks -
omap2_dflt_clk_enable() and omap2_dflt_clk_disable() perform a
NULL check for the enable_reg field of the clk_hw_omap structure.
This enable_reg field however is merely a combination of the index
of the master IP module, and the offset from the master IP module's
base address. A value of 0 is perfectly valid, and the current error
checking will fail in these cases. The issue was found when trying
to enable the iva2_ck clock on OMAP3 platforms.
So, switch the check to use IS_ERR. This correction is similar to the
logic used in commit c807dbedb5e5 ("clk: ti: fix ti_clk_get_reg_addr
error handling").
Signed-off-by: Suman Anna <s-a...@ti.com>
---
Hi Tero,
Patch done against 4.3-rc3. There are couple of similar checks in
drivers/clk/ti/clockdomain.c, but those seem to be ok. This is
a non-urgent fix, as there are currently no active users of
iva2_ck in the kernel (the MMU node is disabled in DT atm).
Boot tested on OMAP3 Beagle-XM, AM437x GP EVM, AM335x BeagleBone
Black, OMAP4 Panda, OMAP5 uEVM and DRA7 Beagle-X15 boards.
regards
Suman
Following is the error log from a unit test of the IVA MMU on OMAP3 using
some additional patch to enable the DTS node,
[ 86.626342] omap_iommu_test_init: iommu_test_init entered
[ 86.632080] omap_iommu_test iommu_test: Enabling IOMMU...
[ 86.647460] omap_iommu_test iommu_test: testing IOMMU 5d000000.mmu
[ 86.654815] omap2_dflt_clk_enable: iva2_ck missing enable_reg
[ 86.680938] ------------[ cut here ]------------
[ 86.685821] WARNING: CPU: 0 PID: 910 at drivers/clk/clk.c:675
clk_disable+0x28/0x34()
[ 86.694091] Modules linked in: iommu_dt_test(O+)
[ 86.698974] CPU: 0 PID: 910 Comm: insmod Tainted: G O
4.3.0-rc3-00008-g61458979cbbe #40
[ 86.708618] Hardware name: Generic OMAP36xx (Flattened Device Tree)
[ 86.715240] [<c0017b44>] (unwind_backtrace) from [<c0013eac>]
(show_stack+0x10/0x14)
[ 86.723419] [<c0013eac>] (show_stack) from [<c0342a04>]
(dump_stack+0x84/0x9c)
[ 86.731048] [<c0342a04>] (dump_stack) from [<c003e924>]
(warn_slowpath_common+0x78/0xb4)
[ 86.739593] [<c003e924>] (warn_slowpath_common) from [<c003e9fc>]
(warn_slowpath_null+0x1c/0x24)
[ 86.748870] [<c003e9fc>] (warn_slowpath_null) from [<c04fe4c8>]
(clk_disable+0x28/0x34)
[ 86.757324] [<c04fe4c8>] (clk_disable) from [<c0027da0>]
(_disable_clocks+0x18/0x68)
[ 86.765502] [<c0027da0>] (_disable_clocks) from [<c0029cd0>]
(omap_hwmod_deassert_hardreset+0xc8/0x180)
[ 86.775421] [<c0029cd0>] (omap_hwmod_deassert_hardreset) from [<c002a7cc>]
(omap_device_deassert_hardreset+0x34/
0x54)
[ 86.786621] [<c002a7cc>] (omap_device_deassert_hardreset) from [<c03d91f4>]
(omap_iommu_attach_dev+0xbc/0x1fc)
[ 86.797180] [<c03d91f4>] (omap_iommu_attach_dev) from [<c03d5f9c>]
(__iommu_attach_device+0x1c/0x80)
[ 86.806854] [<c03d5f9c>] (__iommu_attach_device) from [<bf000150>]
(omap_iommu_test_probe+0xd0/0x21c [iommu_dt_t
est])
[ 86.818054] [<bf000150>] (omap_iommu_test_probe [iommu_dt_test]) from
[<c03e03ec>] (platform_drv_probe+0x44/0xa4
)
[ 86.828857] [<c03e03ec>] (platform_drv_probe) from [<c03de9b0>]
(driver_probe_device+0x1f4/0x2f0)
[ 86.838195] [<c03de9b0>] (driver_probe_device) from [<c03deb40>]
(__driver_attach+0x94/0x98)
[ 86.847045] [<c03deb40>] (__driver_attach) from [<c03dce34>]
(bus_for_each_dev+0x6c/0xa0)
[ 86.855651] [<c03dce34>] (bus_for_each_dev) from [<c03de0d4>]
(bus_add_driver+0x18c/0x214)
[ 86.864349] [<c03de0d4>] (bus_add_driver) from [<c03df494>]
(driver_register+0x78/0xf8)
[ 86.872772] [<c03df494>] (driver_register) from [<c0009804>]
(do_one_initcall+0x80/0x1dc)
[ 86.881378] [<c0009804>] (do_one_initcall) from [<c0118b60>]
(do_init_module+0x5c/0x1d0)
[ 86.889892] [<c0118b60>] (do_init_module) from [<c00cabf4>]
(load_module+0x1818/0x1f70)
[ 86.898315] [<c00cabf4>] (load_module) from [<c00cb428>]
(SyS_init_module+0xdc/0x14c)
[ 86.906555] [<c00cb428>] (SyS_init_module) from [<c000f6e0>]
(ret_fast_syscall+0x0/0x1c)
[ 86.915039] ---[ end trace 49b229a4289ab8b2 ]---
[ 86.919891] omap_hwmod: mmu_iva: failed to hardreset
[ 86.925384] omap-iommu 5d000000.mmu: deassert_reset failed: -16
[ 86.931640] omap_iommu_test iommu_test: can't get omap iommu: -16
[ 86.938140] omap_iommu_test iommu_test: can't attach iommu device: -16
[ 86.945068] omap_iommu_test_init failed, ret = -16
drivers/clk/ti/clkt_dflt.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
Queued for 4.3-rc-fixes thanks, as I have other patches to push for that.
-Tero
diff --git a/drivers/clk/ti/clkt_dflt.c b/drivers/clk/ti/clkt_dflt.c
index 90d7d8a21c49..1ddc288fce4e 100644
--- a/drivers/clk/ti/clkt_dflt.c
+++ b/drivers/clk/ti/clkt_dflt.c
@@ -222,7 +222,7 @@ int omap2_dflt_clk_enable(struct clk_hw *hw)
}
}
- if (unlikely(!clk->enable_reg)) {
+ if (unlikely(IS_ERR(clk->enable_reg))) {
pr_err("%s: %s missing enable_reg\n", __func__,
clk_hw_get_name(hw));
ret = -EINVAL;
@@ -264,7 +264,7 @@ void omap2_dflt_clk_disable(struct clk_hw *hw)
u32 v;
clk = to_clk_hw_omap(hw);
- if (!clk->enable_reg) {
+ if (IS_ERR(clk->enable_reg)) {
/*
* 'independent' here refers to a clock which is not
* controlled by its parent.
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html