On Wed, Apr 29, 2009 at 7:03 PM, Steve Sakoman <sako...@gmail.com> wrote: > I tried an Overo build from the current top of tree and ran into a > number of twl4030 platform data errors: > > twl4030: PIH (irq 7) chaining IRQs 368..375 > twl4030: power (irq 373) chaining IRQs 376..383 > twl4030_gpio: use which platform_data? > twl4030: gpio (irq 368) chaining IRQs 384..401 > mmci-omap-hs.0: use which platform_data? > mmci-omap-hs.1: use which platform_data? > twl4030_usb: use which platform_data? > twl4030_reg.6: use which platform_data? > regulator: VMMC1: 1850 <--> 3150 mV normal standby > twl4030_reg.17: use which platform_data? > set_machine_constraints: invalid 'VUSB1V5' voltage constraints > twl4030_reg twl4030_reg.17: can't register VUSB1V5, -22 > twl4030_reg: probe of twl4030_reg.17 failed with error -22 > twl4030_reg.18: use which platform_data? > set_machine_constraints: invalid 'VUSB1V8' voltage constraints > twl4030_reg twl4030_reg.18: can't register VUSB1V8, -22 > twl4030_reg: probe of twl4030_reg.18 failed with error -22 > twl4030_reg.19: use which platform_data? > set_machine_constraints: invalid 'VUSB3V1' voltage constraints > twl4030_reg twl4030_reg.19: can't register VUSB3V1, -22 > twl4030_reg: probe of twl4030_reg.19 failed with error -22 > i2c_omap i2c_omap.3: bus 3 rev3.12 at 400 kHz > SCSI subsystem initialized > twl4030_usb twl4030_usb: ldo init failed > > Before I go digging, have there been any recent changes in 4030 init > that require me to update the Overo board file?
I get the same on pandora, although it continues booting fine after that. Maybe regulator folks will comment about regulator errors. -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
