Hi,
Grygorii Strashko <grygorii.stras...@ti.com> writes:
> Since system clocksource is finally selected by Clocksource core at
> fs_initcall stage during boot there are no reasons to initialize
> ti_32k_timer at early boot stages. Hence, ti_32k_timer can be
> converted to use platform device/driver model and its PM can be
> implemented using PM runtime which is common for OMAP devices.
>
> Platform specific initialization code has to be disabled once as
> ti_32k_timer is converted to platform device - otherwise OMAP platform
> code will generate boot warnings.
>
> After this change, all counter_32k's platform code can be removed
> once all OMAP boards will be converted to DT.
>
> Cc: Tony Lindgren <t...@atomide.com>
> Cc: Felipe Balbi <ba...@ti.com>
> Signed-off-by: Grygorii Strashko <grygorii.stras...@ti.com>
> ---
> arch/arm/mach-omap2/timer.c | 16 +++--------
> drivers/clocksource/timer-ti-32k.c | 58
> ++++++++++++++++++++++++++++++++------
> 2 files changed, 53 insertions(+), 21 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
> index b18ebbe..3bfde44 100644
> --- a/arch/arm/mach-omap2/timer.c
> +++ b/arch/arm/mach-omap2/timer.c
> @@ -393,23 +393,15 @@ static const struct of_device_id omap_counter_match[]
> __initconst = {
> static int __init __maybe_unused omap2_sync32k_clocksource_init(void)
> {
> int ret;
> - struct device_node *np = NULL;
> struct omap_hwmod *oh;
> const char *oh_name = "counter_32k";
>
> /*
> - * If device-tree is present, then search the DT blob
> - * to see if the 32kHz counter is supported.
> + * If device-tree is present, then just exit -
> + * 32kHz clocksource driver will handle it.
> */
> - if (of_have_populated_dt()) {
> - np = omap_get_timer_dt(omap_counter_match, NULL);
> - if (!np)
> - return -ENODEV;
> -
> - of_property_read_string_index(np, "ti,hwmods", 0, &oh_name);
> - if (!oh_name)
> - return -ENODEV;
> - }
> + if (of_have_populated_dt())
> + return 0;
>
> /*
> * First check hwmod data is available for sync32k counter
> diff --git a/drivers/clocksource/timer-ti-32k.c
> b/drivers/clocksource/timer-ti-32k.c
> index 8518d9d..e71496f 100644
> --- a/drivers/clocksource/timer-ti-32k.c
> +++ b/drivers/clocksource/timer-ti-32k.c
> @@ -39,8 +39,11 @@
> #include <linux/time.h>
> #include <linux/sched_clock.h>
> #include <linux/clocksource.h>
> +#include <linux/module.h>
> #include <linux/of.h>
> #include <linux/of_address.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
>
> /*
> * 32KHz clocksource ... always available, on pretty most chips except
> @@ -88,15 +91,28 @@ static u64 notrace omap_32k_read_sched_clock(void)
> return ti_32k_read_cycles(&ti_32k_timer.cs);
> }
>
> -static void __init ti_32k_timer_init(struct device_node *np)
> +static const struct of_device_id ti_32k_of_table[] = {
> + { .compatible = "ti,omap-counter32k" },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, ti_32k_of_table);
> +
> +static int __init ti_32k_probe(struct platform_device *pdev)
> {
> + struct device *dev = &pdev->dev;
> + struct resource *res;
> int ret;
>
> - ti_32k_timer.base = of_iomap(np, 0);
> - if (!ti_32k_timer.base) {
> - pr_err("Can't ioremap 32k timer base\n");
> - return;
> - }
> + /* Static mapping, never released */
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + ti_32k_timer.base = devm_ioremap_resource(dev, res);
> + if (IS_ERR(ti_32k_timer.base))
> + return PTR_ERR(ti_32k_timer.base);
> +
> + pm_runtime_enable(dev);
> + ret = pm_runtime_get_sync(dev);
> + if (ret < 0)
> + goto probe_err;
>
> ti_32k_timer.counter = ti_32k_timer.base;
>
> @@ -116,11 +132,35 @@ static void __init ti_32k_timer_init(struct device_node
> *np)
> ret = clocksource_register_hz(&ti_32k_timer.cs, 32768);
> if (ret) {
> pr_err("32k_counter: can't register clocksource\n");
> - return;
> + goto probe_err;
> }
>
> sched_clock_register(omap_32k_read_sched_clock, 32, 32768);
> pr_info("OMAP clocksource: 32k_counter at 32768 Hz\n");
> + return 0;
> +
> +probe_err:
> + pm_runtime_put_noidle(dev);
> + return ret;
> +};
> +
> +static struct platform_driver ti_32k_driver __initdata = {
> + .probe = ti_32k_probe,
> + .driver = {
> + .name = "ti_32k_timer",
> + .of_match_table = of_match_ptr(ti_32k_of_table),
> + }
> +};
> +
> +static int __init ti_32k_init(void)
> +{
> + return platform_driver_register(&ti_32k_driver);
> }
> -CLOCKSOURCE_OF_DECLARE(ti_32k_timer, "ti,omap-counter32k",
> - ti_32k_timer_init);
> +
> +subsys_initcall(ti_32k_init);
> +
> +MODULE_AUTHOR("Paul Mundt");
> +MODULE_AUTHOR("Juha Yrjölä");
> +MODULE_DESCRIPTION("OMAP2 32k Timer");
> +MODULE_ALIAS("platform:ti_32k_timer");
> +MODULE_LICENSE("GPL v2");this will break clksource_of_init(), right ? Eventually, we want that to be the only thing called by our .init_time method. I'll leave it to Tony to decide, but IMO this is not a good path forward for timers. -- balbi
signature.asc
Description: PGP signature
