* Ulf Hansson <ulf.hans...@linaro.org> [151208 05:18]:
> On 8 December 2015 at 01:32, Tony Lindgren <t...@atomide.com> wrote:
> > * Ulf Hansson <ulf.hans...@linaro.org> [151207 16:20]:
> >> +Linus
> >>
> >> On 7 December 2015 at 23:54, Tony Lindgren <t...@atomide.com> wrote:
> >> > Commit ce037275861e ("mmc: pwrseq_simple: use GPIO descriptors array 
> >> > API")
> >> > changed the handling MMC power sequence so GPIOs no longer are optional.
> >> >
> >> > This broke SDIO WLAN at least for omap5 that can't yet use the reset 
> >> > GPIOs
> >> > with pwrseq_simple as a wait is needed after enabling the SDIO device.
> >>
> >> Can you elaborate on this. Did it break omap5 or not? :-)
> >
> > Yes it broke WLAN for omap5 that I just got fixed.. It only uses the clocks
> > art of the pwrseq currently because of the delay needed.
> >
> >> Also, I am interested to know more about the waiting period you need.
> >> I assume that's because of the HW's characteristic?
> >
> > At least TI wl12xx and Marvell 8787 need a delay after enabling the the 
> > WLAN.
> >
> >> Why can't we have that being described in DT and then make
> >> pwrseq_simple *wait* if needed?
> >
> > We can, but I'm thinking that we might be better off adding support for
> > regulators to pwrseq. Both TI wl12xx and Marvell 8787 get power from the
> > battery, and probably have an integrated regulator.
> 
> Sounds very reasonable! Perhaps some of the delays can be handled
> within the context of the regulator then!?

Yes that's in the regulator binding. As long as the pwrseq code can sleep
there's no problem with that.

> > Also, the delay and the power up sequencey can be more complicated than what
> > we currently support. In the 8787 case, pdn pin needs to be asserted for 
> > 300ms
> > after power pins are stable and while reset is held high.
> 
> I am for sure open to extend pwrseq_simple, please go ahead!
> 
> The initial version provided a proof of concept and the
> infrastructure. I expect and want people to extend it to suit their
> HWs.
> 
> If we at some point find that pwrseq_simple starts to become too
> complex, we may add another pwrseq type with a corresponding new
> compatible string.

Yeah OK I'll take a look when I get a chance.

Regards,

Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to