This change makes the DT file to be easier to read since the memcpy
channels array does not need the '/bits/ 16' to be specified, which might
confuse some people.
Signed-off-by: Peter Ujfalusi <peter.ujfal...@ti.com>
---
Documentation/devicetree/bindings/dma/ti-edma.txt | 5 ++---
drivers/dma/edma.c | 22 ++++++++++------------
include/linux/platform_data/edma.h | 2 +-
3 files changed, 13 insertions(+), 16 deletions(-)
diff --git a/Documentation/devicetree/bindings/dma/ti-edma.txt
b/Documentation/devicetree/bindings/dma/ti-edma.txt
index d3d0a4fb1c73..ae8b8f1d6e69 100644
--- a/Documentation/devicetree/bindings/dma/ti-edma.txt
+++ b/Documentation/devicetree/bindings/dma/ti-edma.txt
@@ -22,8 +22,7 @@ Required properties:
Optional properties:
- ti,hwmods: Name of the hwmods associated to the eDMA CC
- ti,edma-memcpy-channels: List of channels allocated to be used for memcpy,
iow
- these channels will be SW triggered channels. The list must
- contain 16 bits numbers, see example.
+ these channels will be SW triggered channels. See example.
- ti,edma-reserved-slot-ranges: PaRAM slot ranges which should not be used by
the driver, they are allocated to be used by for example the
DSP. See example.
@@ -56,7 +55,7 @@ edma: edma@49000000 {
ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 7>, <&edma_tptc2 0>;
/* Channel 20 and 21 is allocated for memcpy */
- ti,edma-memcpy-channels = /bits/ 16 <20 21>;
+ ti,edma-memcpy-channels = <20 21>;
/* The following PaRAM slots are reserved: 35-45 and 100-110 */
ti,edma-reserved-slot-ranges = /bits/ 16 <35 10>,
/bits/ 16 <100 10>;
diff --git a/drivers/dma/edma.c b/drivers/dma/edma.c
index 2af8f32bba0b..89fc17f3a6ff 100644
--- a/drivers/dma/edma.c
+++ b/drivers/dma/edma.c
@@ -1752,16 +1752,14 @@ static enum dma_status edma_tx_status(struct dma_chan
*chan,
return ret;
}
-static bool edma_is_memcpy_channel(int ch_num, u16 *memcpy_channels)
+static bool edma_is_memcpy_channel(int ch_num, s32 *memcpy_channels)
{
- s16 *memcpy_ch = memcpy_channels;
-
if (!memcpy_channels)
return false;
- while (*memcpy_ch != -1) {
- if (*memcpy_ch == ch_num)
+ while (*memcpy_channels != -1) {
+ if (*memcpy_channels == ch_num)
return true;
- memcpy_ch++;
+ memcpy_channels++;
}
return false;
}
@@ -1775,7 +1773,7 @@ static void edma_dma_init(struct edma_cc *ecc, bool
legacy_mode)
{
struct dma_device *s_ddev = &ecc->dma_slave;
struct dma_device *m_ddev = NULL;
- s16 *memcpy_channels = ecc->info->memcpy_channels;
+ s32 *memcpy_channels = ecc->info->memcpy_channels;
int i, j;
dma_cap_zero(s_ddev->cap_mask);
@@ -1996,16 +1994,16 @@ static struct edma_soc_info
*edma_setup_info_from_dt(struct device *dev,
prop = of_find_property(dev->of_node, "ti,edma-memcpy-channels", &sz);
if (prop) {
const char pname[] = "ti,edma-memcpy-channels";
- size_t nelm = sz / sizeof(s16);
- s16 *memcpy_ch;
+ size_t nelm = sz / sizeof(s32);
+ s32 *memcpy_ch;
- memcpy_ch = devm_kcalloc(dev, nelm + 1, sizeof(s16),
+ memcpy_ch = devm_kcalloc(dev, nelm + 1, sizeof(s32),
GFP_KERNEL);
if (!memcpy_ch)
return ERR_PTR(-ENOMEM);
- ret = of_property_read_u16_array(dev->of_node, pname,
- (u16 *)memcpy_ch, nelm);
+ ret = of_property_read_u32_array(dev->of_node, pname,
+ (u32 *)memcpy_ch, nelm);
if (ret)
return ERR_PTR(ret);
diff --git a/include/linux/platform_data/edma.h
b/include/linux/platform_data/edma.h
index 105700e62ea1..0a533f94438f 100644
--- a/include/linux/platform_data/edma.h
+++ b/include/linux/platform_data/edma.h
@@ -76,7 +76,7 @@ struct edma_soc_info {
struct edma_rsv_info *rsv;
/* List of channels allocated for memcpy, terminated with -1 */
- s16 *memcpy_channels;
+ s32 *memcpy_channels;
s8 (*queue_priority_mapping)[2];
const s16 (*xbar_chans)[2];
--
2.6.3
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
