No functional change. Previously omap_control_phy_power() was used to power
off the PHY during probe. But once PIPE3 driver is adapted to use syscon,
omap_control_phy_power() cannot be used. Hence used ti_pipe3_power_off
to power off the PHY.
Signed-off-by: Kishon Vijay Abraham I <kis...@ti.com>
Acked-by: Roger Quadros <rog...@ti.com>
---
drivers/phy/phy-ti-pipe3.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/phy/phy-ti-pipe3.c b/drivers/phy/phy-ti-pipe3.c
index 1991efd..0ce4194 100644
--- a/drivers/phy/phy-ti-pipe3.c
+++ b/drivers/phy/phy-ti-pipe3.c
@@ -475,8 +475,6 @@ static int ti_pipe3_probe(struct platform_device *pdev)
if (ret)
return ret;
- omap_control_phy_power(phy->control_dev, 0);
-
platform_set_drvdata(pdev, phy);
pm_runtime_enable(dev);
@@ -495,6 +493,9 @@ static int ti_pipe3_probe(struct platform_device *pdev)
return PTR_ERR(generic_phy);
phy_set_drvdata(generic_phy, phy);
+
+ ti_pipe3_power_off(generic_phy);
+
phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
if (IS_ERR(phy_provider))
return PTR_ERR(phy_provider);
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
