From: David Rivshin <drivs...@allworx.com>
When a fixed-link sub-node exists in a slave node, the slave node
is also the PHY node. Since this is a separate use of the slave node,
of_node_get() should be used to increment the reference count.
Fixes: 1f71e8c96fc6 ("drivers: net: cpsw: Add support for fixed-link PHY")
Signed-off-by: David Rivshin <drivs...@allworx.com>
---
'pd' was renamed to 'phy_dev' to better fit the naming convention in the
function/file.
drivers/net/ethernet/ti/cpsw.c | 13 +++++++++----
1 file changed, 9 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index bc6d20d..3b489ca 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -2036,16 +2036,21 @@ static int cpsw_probe_dt(struct cpsw_priv *priv,
priv->phy_node = of_parse_phandle(slave_node, "phy-handle", 0);
parp = of_get_property(slave_node, "phy_id", &lenp);
if (of_phy_is_fixed_link(slave_node)) {
- struct phy_device *pd;
+ struct device_node *phy_node;
+ struct phy_device *phy_dev;
+ /* In the case of a fixed PHY, the DT node associated
+ * to the PHY is the Ethernet MAC DT node.
+ */
ret = of_phy_register_fixed_link(slave_node);
if (ret)
return ret;
- pd = of_phy_find_device(slave_node);
- if (!pd)
+ phy_node = of_node_get(slave_node);
+ phy_dev = of_phy_find_device(phy_node);
+ if (!phy_dev)
return -ENODEV;
snprintf(slave_data->phy_id, sizeof(slave_data->phy_id),
- PHY_ID_FMT, pd->bus->id, pd->addr);
+ PHY_ID_FMT, phy_dev->bus->id, phy_dev->addr);
} else if (parp) {
u32 phyid;
struct device_node *mdio_node;
--
2.5.0
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
