* Amit Kucheria <amit.kuche...@verdurent.com> [090603 01:51]:
> Bump..
>
> This patch was acked by David Brownell earlier in the thread.
OK, I add it, but will reset all the twl stuff to mainline after 2.6.30.
These patches need to get submitted to mainline, all the other twl code is
there already.
Tony
> Regards,
> Amit
>
> On Wed, May 06, 2009 at 03:03:38PM +0300, Amit Kucheria wrote:
> > Check for return values of i2c read/write operations and size of scripts
> > being
> > uploaded to TWL4030
> >
> > (Removed the unrelated string changes based on David Brownell's comment)
> >
> > Signed-off-by: Amit Kucheria <amit.kuche...@verdurent.com>
> > ---
> > drivers/mfd/twl4030-power.c | 52
> > +++++++++++++++++++++++++++++++-----------
> > 1 files changed, 38 insertions(+), 14 deletions(-)
> >
> > diff --git a/drivers/mfd/twl4030-power.c b/drivers/mfd/twl4030-power.c
> > index 9dc493b..8f5d149 100644
> > --- a/drivers/mfd/twl4030-power.c
> > +++ b/drivers/mfd/twl4030-power.c
> > @@ -257,36 +257,40 @@ static int __init config_warmreset_sequence(u8
> > address)
> > return err;
> > }
> >
> > -void twl4030_configure_resource(struct twl4030_resconfig *rconfig)
> > +static int __init twl4030_configure_resource(struct twl4030_resconfig
> > *rconfig)
> > {
> > int rconfig_addr;
> > + int err;
> > u8 type;
> >
> > if (rconfig->resource > NUM_OF_RESOURCES) {
> > printk(KERN_ERR
> > "TWL4030 Resource %d does not exist\n",
> > rconfig->resource);
> > - return;
> > + return -EINVAL;
> > }
> >
> > rconfig_addr = res_config_addrs[rconfig->resource];
> >
> > /* Set resource group */
> > -
> > if (rconfig->devgroup >= 0)
> > - twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
> > + err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
> > rconfig->devgroup << 5,
> > rconfig_addr + DEVGROUP_OFFSET);
> > + if (err < 0) {
> > + printk(KERN_ERR
> > + "TWL4030 failed to program devgroup");
> > + return err;
> > + }
> >
> > /* Set resource types */
> > -
> > - if (twl4030_i2c_read_u8(TWL4030_MODULE_PM_RECEIVER,
> > - &type,
> > - rconfig_addr + TYPE_OFFSET) < 0) {
> > + err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_RECEIVER, &type,
> > + rconfig_addr + TYPE_OFFSET);
> > + if (err < 0) {
> > printk(KERN_ERR
> > - "TWL4030 Resource %d type could not read\n",
> > - rconfig->resource);
> > - return;
> > + "TWL4030 Resource %d type could not be read\n",
> > + rconfig->resource);
> > + return err;
> > }
> >
> > if (rconfig->type >= 0) {
> > @@ -299,8 +303,15 @@ void twl4030_configure_resource(struct
> > twl4030_resconfig *rconfig)
> > type |= rconfig->type2 << 3;
> > }
> >
> > - twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
> > + err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
> > type, rconfig_addr + TYPE_OFFSET);
> > + if (err < 0) {
> > + printk(KERN_ERR
> > + "TWL4030 failed to program resource type");
> > + return err;
> > + }
> > +
> > + return 0;
> >
> > }
> >
> > @@ -309,6 +320,12 @@ static int __init load_triton_script(struct
> > twl4030_script *tscript)
> > u8 address = triton_next_free_address;
> > int err;
> >
> > + /* Make sure the script isn't going beyond last valid address */
> > + if ((address + tscript->size) > (END_OF_SCRIPT-1)) {
> > + printk(KERN_ERR "TWL4030 script too big error\n");
> > + return -EINVAL;
> > + }
> > +
> > err = twl4030_write_script(address, tscript->script, tscript->size);
> > if (err)
> > return err;
> > @@ -346,15 +363,22 @@ void __init twl4030_power_init(struct
> > twl4030_power_data *triton2_scripts)
> >
> > for (i = 0; i < triton2_scripts->size; i++) {
> > err = load_triton_script(triton2_scripts->scripts[i]);
> > - if (err)
> > + if (err < 0) {
> > + printk(KERN_ERR "TWL4030 failed to load scripts");
> > break;
> > + }
> > }
> >
> > resconfig = triton2_scripts->resource_config;
> > if (resconfig) {
> > while (resconfig->resource) {
> > - twl4030_configure_resource(resconfig);
> > + err = twl4030_configure_resource(resconfig);
> > resconfig++;
> > + if (err < 0) {
> > + printk(KERN_ERR
> > + "TWL4030 failed to configure resource");
> > + break;
> > + }
> > }
> > }
> >
> > --
> > 1.6.0.4
> >
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> > the body of a message to majord...@vger.kernel.org
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
>
> --
> -------------------------------------------------------------------------
> Amit Kucheria, Kernel Developer, Verdurent
> -------------------------------------------------------------------------
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majord...@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
