>-----Original Message-----
>From: ext Jean Pihet [mailto:jpi...@mvista.com]
>Sent: 08 June, 2009 16:06
>To: Kristo Tero (Nokia-D/Tampere)
>Cc: linux-omap@vger.kernel.org
>Subject: Re: [PATCH] RX51: Add support for SDRAM chip select 1
>
>Hi Tero,
>
>You should also ensure that the CKE signals mux settings are
>correct cf. an example for Overo at
>http://patchwork.kernel.org/patch/28598/.
Our bootloader configures the pads, I just double checked that it also changes
CKE pads to proper config.
The patch looks good otherwise? I tested this on RX51 HW and it works ok.
-Tero
>
>Note: the config option CONFIG_OMAP_MUX must be set for the
>omap_cfg* functions to have any effect.
>
>Regards,
>Jean
>
>On Monday 08 June 2009 14:03:23 Tero Kristo wrote:
>> From: Tero Kristo <tero.kri...@nokia.com>
>>
>> Applies on top of PM branch.
>>
>> Signed-off-by: Tero Kristo <tero.kri...@nokia.com>
>> ---
>> arch/arm/mach-omap2/board-rx51.c | 6 +++++-
>> 1 files changed, 5 insertions(+), 1 deletions(-)
>>
>> diff --git a/arch/arm/mach-omap2/board-rx51.c
>> b/arch/arm/mach-omap2/board-rx51.c index 3e4b7f8..7ab8a74 100644
>> --- a/arch/arm/mach-omap2/board-rx51.c
>> +++ b/arch/arm/mach-omap2/board-rx51.c
>> @@ -61,7 +61,11 @@ static struct omap_bluetooth_config
>rx51_bt_config
>> = {
>>
>> static void __init rx51_init_irq(void) {
>> - omap2_init_common_hw(rx51_get_sdram_timings(), NULL,
>> + struct omap_sdrc_params *sdrc_params;
>> +
>> + sdrc_params = rx51_get_sdram_timings();
>> +
>> + omap2_init_common_hw(sdrc_params, sdrc_params,
>> omap3_mpu_rate_table,
>> omap3_dsp_rate_table,
>> omap3_l3_rate_table);
>
>
>--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
