There is currently no provision for passing IRQ trigger flags for
serial IRQs with triggering requirements (such as GPIO IRQs)
This patch adds irqflags to plat_serial8250_port that can be passed
from board file to reqest_irq() of 8250 driver
Changes are backward compatible with boards passing UPF_SHARE_IRQ flag
Tested on Zoom2 board that has IRQF_TRIGGER_RISING requirement for 8250 irq
Signed-off-by: Vikram Pandita <vikram.pand...@ti.com>
---
drivers/serial/8250.c | 14 +++++++++-----
drivers/serial/8250.h | 1 +
include/linux/serial_8250.h | 1 +
include/linux/serial_core.h | 1 +
4 files changed, 12 insertions(+), 5 deletions(-)
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index bab115e..d18a4c0 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -1674,7 +1674,7 @@ static int serial_link_irq_chain(struct uart_8250_port
*up)
INIT_LIST_HEAD(&up->list);
i->head = &up->list;
spin_unlock_irq(&i->lock);
-
+ irq_flags |= up->port.irqflags;
ret = request_irq(up->port.irq, serial8250_interrupt,
irq_flags, "serial", i);
if (ret < 0)
@@ -2023,7 +2023,7 @@ static int serial8250_startup(struct uart_port *port)
* allow register changes to become visible.
*/
spin_lock_irqsave(&up->port.lock, flags);
- if (up->port.flags & UPF_SHARE_IRQ)
+ if (up->port.irqflags & IRQF_SHARED)
disable_irq_nosync(up->port.irq);
wait_for_xmitr(up, UART_LSR_THRE);
@@ -2036,7 +2036,7 @@ static int serial8250_startup(struct uart_port *port)
iir = serial_in(up, UART_IIR);
serial_out(up, UART_IER, 0);
- if (up->port.flags & UPF_SHARE_IRQ)
+ if (up->port.irqflags & IRQF_SHARED)
enable_irq(up->port.irq);
spin_unlock_irqrestore(&up->port.lock, flags);
@@ -2681,6 +2681,7 @@ static void __init serial8250_isa_init_ports(void)
i++, up++) {
up->port.iobase = old_serial_port[i].port;
up->port.irq = irq_canonicalize(old_serial_port[i].irq);
+ up->port.irqflags = old_serial_port[i].irqflags;
up->port.uartclk = old_serial_port[i].baud_base * 16;
up->port.flags = old_serial_port[i].flags;
up->port.hub6 = old_serial_port[i].hub6;
@@ -2689,7 +2690,7 @@ static void __init serial8250_isa_init_ports(void)
up->port.regshift = old_serial_port[i].iomem_reg_shift;
set_io_from_upio(&up->port);
if (share_irqs)
- up->port.flags |= UPF_SHARE_IRQ;
+ up->port.irqflags |= IRQF_SHARED;
}
}
@@ -2879,6 +2880,7 @@ int __init early_serial_setup(struct uart_port *port)
p->iobase = port->iobase;
p->membase = port->membase;
p->irq = port->irq;
+ p->irqflags = port->irqflags;
p->uartclk = port->uartclk;
p->fifosize = port->fifosize;
p->regshift = port->regshift;
@@ -2952,6 +2954,7 @@ static int __devinit serial8250_probe(struct
platform_device *dev)
port.iobase = p->iobase;
port.membase = p->membase;
port.irq = p->irq;
+ port.irqflags = p->irqflags;
port.uartclk = p->uartclk;
port.regshift = p->regshift;
port.iotype = p->iotype;
@@ -2964,7 +2967,7 @@ static int __devinit serial8250_probe(struct
platform_device *dev)
port.serial_out = p->serial_out;
port.dev = &dev->dev;
if (share_irqs)
- port.flags |= UPF_SHARE_IRQ;
+ port.irqflags |= IRQF_SHARED;
ret = serial8250_register_port(&port);
if (ret < 0) {
dev_err(&dev->dev, "unable to register port at index %d
"
@@ -3106,6 +3109,7 @@ int serial8250_register_port(struct uart_port *port)
uart->port.iobase = port->iobase;
uart->port.membase = port->membase;
uart->port.irq = port->irq;
+ uart->port.irqflags = port->irqflags;
uart->port.uartclk = port->uartclk;
uart->port.fifosize = port->fifosize;
uart->port.regshift = port->regshift;
diff --git a/drivers/serial/8250.h b/drivers/serial/8250.h
index 5202603..9b34b04 100644
--- a/drivers/serial/8250.h
+++ b/drivers/serial/8250.h
@@ -20,6 +20,7 @@ struct old_serial_port {
unsigned int baud_base;
unsigned int port;
unsigned int irq;
+ unsigned long irqflags;
unsigned int flags;
unsigned char hub6;
unsigned char io_type;
diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h
index d4d2a78..fb46aba 100644
--- a/include/linux/serial_8250.h
+++ b/include/linux/serial_8250.h
@@ -22,6 +22,7 @@ struct plat_serial8250_port {
void __iomem *membase; /* ioremap cookie or NULL */
resource_size_t mapbase; /* resource base */
unsigned int irq; /* interrupt number */
+ unsigned long irqflags; /* request_irq flags */
unsigned int uartclk; /* UART clock rate */
void *private_data;
unsigned char regshift; /* register shift */
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 57a97e5..a8635ef 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -258,6 +258,7 @@ struct uart_port {
unsigned int (*serial_in)(struct uart_port *, int);
void (*serial_out)(struct uart_port *, int, int);
unsigned int irq; /* irq number */
+ unsigned long irqflags; /* irq flags */
unsigned int uartclk; /* base uart clock */
unsigned int fifosize; /* tx fifo size */
unsigned char x_char; /* xon/xoff char */
--
1.6.0.3.613.g9f8f13
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
