>From d9cb1021a2d64c89bbc5763dbbcece68bcc0147c Mon Sep 17 00:00:00 2001
From: Adrian Hunter <adrian.hun...@nokia.com>
Date: Fri, 26 Jun 2009 11:29:20 +0300
Subject: [PATCH] omap_hsmmc: set a large data timeout for commands with busy
signal
Commands like SWITCH (CMD6) send a response and then signal busy
while the operation is completed. These commands are expected
to always succeed (otherwise the response would have indicated an
error).
Set an arbitrarily large data timeout value (100ms) for these commands
to ensure that premature timeouts do not occur.
Signed-off-by: Adrian Hunter <adrian.hun...@nokia.com>
---
drivers/mmc/host/omap_hsmmc.c | 15 +++++++++++----
1 files changed, 11 insertions(+), 4 deletions(-)
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index abe1fa1..f5f207d 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -990,7 +990,8 @@ static int omap_hsmmc_start_dma_transfer(struct
omap_hsmmc_host *host,
}
static void set_data_timeout(struct omap_hsmmc_host *host,
- struct mmc_request *req)
+ unsigned int timeout_ns,
+ unsigned int timeout_clks)
{
unsigned int timeout, cycle_ns;
uint32_t reg, clkd, dto = 0;
@@ -1001,8 +1002,8 @@ static void set_data_timeout(struct omap_hsmmc_host *host,
clkd = 1;
cycle_ns = 1000000000 / (clk_get_rate(host->fclk) / clkd);
- timeout = req->data->timeout_ns / cycle_ns;
- timeout += req->data->timeout_clks;
+ timeout = timeout_ns / cycle_ns;
+ timeout += timeout_clks;
if (timeout) {
while ((timeout & 0x80000000) == 0) {
dto += 1;
@@ -1036,12 +1037,18 @@ omap_hsmmc_prepare_data(struct omap_hsmmc_host *host,
struct mmc_request *req)
if (req->data == NULL) {
OMAP_HSMMC_WRITE(host->base, BLK, 0);
+ /*
+ * Set an arbitrary 100ms data timeout for commands with
+ * busy signal.
+ */
+ if (req->cmd->flags & MMC_RSP_BUSY)
+ set_data_timeout(host, 100000000U, 0);
return 0;
}
OMAP_HSMMC_WRITE(host->base, BLK, (req->data->blksz)
| (req->data->blocks << 16));
- set_data_timeout(host, req);
+ set_data_timeout(host, req->data->timeout_ns, req->data->timeout_clks);
if (host->use_dma) {
ret = omap_hsmmc_start_dma_transfer(host, req);
--
1.5.6.3
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
