On Mon, 10 Aug 2009, Sanjeev Premi wrote: > The argument 'mpurate' had no effect on the MPU > frequency. This patch fixes the same.
Thanks, I'll plan to squeeze this into the .32 merge window, with a couple of minor changes described below. Please review the changes: > > Signed-off-by: Sanjeev Premi <[email protected]> > --- > arch/arm/mach-omap2/clock34xx.c | 14 ++++++++++---- > 1 files changed, 10 insertions(+), 4 deletions(-) > > diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c > index 045da92..0c62aad 100644 > --- a/arch/arm/mach-omap2/clock34xx.c > +++ b/arch/arm/mach-omap2/clock34xx.c > @@ -27,6 +27,7 @@ > #include <linux/limits.h> > #include <linux/bitops.h> > > +#include <mach/cpu.h> > #include <mach/clock.h> > #include <mach/sram.h> > #include <asm/div64.h> > @@ -948,13 +949,18 @@ static int __init omap2_clk_arch_init(void) > if (clk_set_rate(&virt_prcm_set, mpurate)) > printk(KERN_ERR "Could not find matching MPU rate\n"); > #endif The previous four lines (including the three above) have been removed from clock34xx.c. > + if (clk_set_rate(&dpll1_ck, mpurate)) > + printk(KERN_ERR "*** Unable to set MPU rate\n"); > + omap3_dpll_recalc(&dpll1_ck); I dropped the omap3_dpll_recalc(&dpll1_ck); since the following recalculate_root_clocks() should handle this. > recalculate_root_clocks(); > > - printk(KERN_INFO "Switched to new clocking rate (Crystal/DPLL3/MPU): " > + printk(KERN_INFO "Switched to new clocking rate (Crystal/Core/MPU): " > "%ld.%01ld/%ld/%ld MHz\n", > - (osc_sys_ck.rate / 1000000), (osc_sys_ck.rate / 100000) % 10, > - (core_ck.rate / 1000000), (dpll1_fck.rate / 1000000)) ; > + (osc_sys_ck.rate / 1000000), ((osc_sys_ck.rate / 100000) % 10), > + (core_ck.rate / 1000000), (arm_fck.rate / 1000000)) ; > + > + calibrate_delay(); > > return 0; > } > @@ -1013,7 +1019,7 @@ int __init omap2_clk_init(void) > > recalculate_root_clocks(); > > - printk(KERN_INFO "Clocking rate (Crystal/DPLL/ARM core): " > + printk(KERN_INFO "Clocking rate (Crystal/Core/MPU): " > "%ld.%01ld/%ld/%ld MHz\n", > (osc_sys_ck.rate / 1000000), (osc_sys_ck.rate / 100000) % 10, > (core_ck.rate / 1000000), (arm_fck.rate / 1000000)); > -- > 1.6.2.2 > - Paul -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
