On Tue, Aug 18, 2009 at 5:53 PM, Shilimkar, Santosh<santosh.shilim...@ti.com> wrote: >> -----Original Message----- >> From: linux-omap-ow...@vger.kernel.org [mailto:linux-omap- >> ow...@vger.kernel.org] On Behalf Of vimal singh >> Sent: Tuesday, August 18, 2009 5:49 PM >> To: linux-omap@vger.kernel.org >> Subject: SDP support seems broken in LO >> >> LO seems broken on OMAP3430 SDP platform. I compile latest kernel with >> 'omap_3430sdp_defconfig' config options. >> >> Booting hangs after kernel uncompressed and last message which appears >> is 'booting the kernel' >> >> >> Thanks and regards, >> vimal >> >> See below log: >> >> ## Booting image at 80000000 ... >> Image Name: Linux-2.6.31-rc5-omap1-05896-ge0 >> Image Type: ARM Linux Kernel Image (uncompressed) >> Data Size: 2520992 Bytes = 2.4 MB >> Load Address: 80008000 >> Entry Point: 80008000 >> Verifying Checksum ... OK >> OK >> >> Starting kernel ... >> >> Uncompressing >> Linux..................................................................... >> .......................................................................... >> .................. >> done, booting the kernel. > Mainly because of frame-buffer and musb. You can try disabling these two and > see if it boots.
I disabled frame-buffer and usb support fully: # CONFIG_FB is not set # CONFIG_USB_SUPPORT is not set I still get same message. -vimal > > > Regards, > Santosh > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
