On Thu, Oct 08, 2009 at 02:58:54PM +0300, Eduardo Valentin wrote:
> From: Eduardo Valentin <eduardo.valen...@nokia.com>
> Use separated supplies for vaux3 and vmmc2.
> Signed-off-by: Eduardo Valentin <eduardo.valen...@nokia.com>
> +static struct regulator_consumer_supply rx51_vaux3_supply = {
> + .supply = "vmmc",
> +};
> +
I'd expect all these supplies to have devices associated with them (see
below)...
> static struct regulator_consumer_supply rx51_vmmc2_supply = {
> .supply = "vmmc",
> };
> @@ -184,7 +188,7 @@ static struct regulator_init_data rx51_vaux3_mmc = {
> | REGULATOR_CHANGE_STATUS,
> },
> .num_consumer_supplies = 1,
> - .consumer_supplies = &rx51_vmmc2_supply,
> + .consumer_supplies = &rx51_vaux3_supply,
> };
I may have missed it but I don't see rx51_vmmc2_supply added back
anywhere in the patch?
> static struct regulator_init_data rx51_vaux4 = {
> @@ -266,7 +270,7 @@ static int rx51_twlgpio_setup(struct device *dev,
> unsigned gpio, unsigned n)
> /* set up MMC adapters, linking their regulators to them */
> twl4030_mmc_init(mmc);
> rx51_vmmc1_supply.dev = mmc[0].dev;
> - rx51_vmmc2_supply.dev = mmc[1].dev;
> + rx51_vaux3_supply.dev = mmc[1].dev;
...using dev_name rather than dev should avoid the need to do this at
runtime.
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
