On Thu, Nov 5, 2009 at 6:39 PM, Anuj Aggarwal <anuj.aggar...@ti.com> wrote:
> Adding various regulator-consumers for OMAP3EVM-TWL4030 combination
> in board-omap35x-pmic.c. Also, populating the respective fields
> for omap3evm_twldata structure.
>
> Signed-off-by: Anuj Aggarwal <anuj.aggar...@ti.com>
> ---
> arch/arm/mach-omap2/board-omap35x-pmic.c | 81
> +++++++++++++++++++++++++++++-
> arch/arm/mach-omap2/board-omap3evm.c | 2 +-
> 2 files changed, 80 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/board-omap35x-pmic.c
> b/arch/arm/mach-omap2/board-omap35x-pmic.c
> index aae07ab..2ef4932 100644
> --- a/arch/arm/mach-omap2/board-omap35x-pmic.c
> +++ b/arch/arm/mach-omap2/board-omap35x-pmic.c
> @@ -24,10 +24,87 @@
> * Definitions specific to TWL4030/TPS65950
> */
> #if defined(CONFIG_PMIC_TWL4030)
> -static inline void pmic_twl4030_init(void)
> +#if defined(CONFIG_MACH_OMAP3EVM)
What about beagle, overo and others that use the same regulator for
the same purposes?
> +#include <linux/i2c/twl4030.h>
> +
> +extern struct twl4030_platform_data omap3evm_twldata;
The *twldata does not have to be global, it can be passed to pmic_init
as a parameter.
> +/* VDAC */
> +static struct regulator_consumer_supply vdac_consumers[] = {
> + {
> + .supply = "dac",
> + },
> +};
> +
> +static struct regulator_init_data vdac_data = {
> + .constraints = {
> + .name = "VDAC",
> + .min_uV = 1800000,
> + .max_uV = 1800000,
> + .apply_uV = true,
> + .valid_modes_mask = REGULATOR_MODE_NORMAL
> + | REGULATOR_MODE_STANDBY,
> + .valid_ops_mask = REGULATOR_CHANGE_MODE
> + | REGULATOR_CHANGE_STATUS,
> + },
> + .num_consumer_supplies = ARRAY_SIZE(vdac_consumers),
> + .consumer_supplies = vdac_consumers,
> +};
> +
> +/* VPLL2 */
> +static struct regulator_consumer_supply vpll2_consumers[] = {
> + {
> + .supply = "lcd",
> + },
> + {
> + .supply = "sdi",
> + },
> +};
> +
> +static struct regulator_init_data vpll2_data = {
> + .constraints = {
> + .name = "VPLL2",
> + .min_uV = 1800000,
> + .max_uV = 1800000,
> + .apply_uV = true,
> + .valid_modes_mask = REGULATOR_MODE_NORMAL
> + | REGULATOR_MODE_STANDBY,
> + .valid_ops_mask = REGULATOR_CHANGE_MODE
> + | REGULATOR_CHANGE_STATUS,
> + },
> + .num_consumer_supplies = ARRAY_SIZE(vpll2_consumers),
> + .consumer_supplies = vpll2_consumers,
> +};
> +
> +/* VMMC1 */
> +struct regulator_consumer_supply vmmc1_consumers[] = {
> + {
> + .supply = "mmc",
> + },
> +};
> +
> +static struct regulator_init_data vmmc1_data = {
> + .constraints = {
> + .name = "VMMC1",
> + .min_uV = 1850000,
> + .max_uV = 3150000,
> + .valid_modes_mask = REGULATOR_MODE_NORMAL
> + | REGULATOR_MODE_STANDBY,
> + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
> + | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
> + },
> + .num_consumer_supplies = ARRAY_SIZE(vmmc1_consumers),
> + .consumer_supplies = vmmc1_consumers,
> +};
> +
> +static void __init pmic_twl4030_init(void)
> {
> - /* TWL4030 specific init code */
> + /* Initialize the regulator specific fields here */
> + omap3evm_twldata.vdac = &vdac_data;
> + omap3evm_twldata.vpll2 = &vpll2_data;
> + omap3evm_twldata.vmmc1 = &vmmc1_data;
> }
> +#endif /* CONFIG_MACH_OMAP3EVM */
I don't see why would you move board specific code from board specific
file to some "generic" file and add #ifdefs to enable this code only
for that board. Indeed, many OMAP3 boards use TWL/TPS in very similar
way and it does make sence to factor the common code out. But with
your approach each board will have to add its own #ifdef with almost
identical code inside it.
> #else
> static inline void pmic_twl4030_init(void)
> {
> diff --git a/arch/arm/mach-omap2/board-omap3evm.c
> b/arch/arm/mach-omap2/board-omap3evm.c
> index dbdf062..10ac0d2 100644
> --- a/arch/arm/mach-omap2/board-omap3evm.c
> +++ b/arch/arm/mach-omap2/board-omap3evm.c
> @@ -197,7 +197,7 @@ static struct twl4030_madc_platform_data
> omap3evm_madc_data = {
> .irq_line = 1,
> };
>
> -static struct twl4030_platform_data omap3evm_twldata = {
> +struct twl4030_platform_data omap3evm_twldata = {
> .irq_base = TWL4030_IRQ_BASE,
> .irq_end = TWL4030_IRQ_END,
>
> --
> 1.6.2.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majord...@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
Sincerely Yours,
Mike.
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
