Hi,
On Thu, Nov 12, 2009 at 11:17:42AM +0100, ext Kim Botherway wrote:
These patches add omap3 board support for the Timll DEVKIT8000
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 8685df5..5c850e1 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -53,6 +53,10 @@ config MACH_OMAP3_BEAGLE
bool "OMAP3 BEAGLE board"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
+config MACH_OMAP3_DEVKIT8000
+ bool "OMAP3 DEVKIT8000 board"
+ depends on ARCH_OMAP3 && ARCH_OMAP34XX
+
config MACH_OMAP_LDP
bool "OMAP3 LDP board"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 03cb4fc..080f3ac 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -57,6 +57,8 @@ obj-$(CONFIG_MACH_OMAP_2430SDP) +=
board-2430sdp.o \
obj-$(CONFIG_MACH_OMAP_APOLLON) += board-apollon.o
obj-$(CONFIG_MACH_OMAP3_BEAGLE) += board-omap3beagle.o \
mmc-twl4030.o
+obj-$(CONFIG_MACH_OMAP3_DEVKIT8000) += board-omap3devkit8000.o \
+ mmc-twl4030.o
obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o \
mmc-twl4030.o
obj-$(CONFIG_MACH_OVERO) += board-overo.o \
diff --git a/arch/arm/mach-omap2/board-omap3devkit8000.c
b/arch/arm/mach-omap2/board-omap3devkit8000.c
new file mode 100644
index 0000000..5be7852
--- /dev/null
+++ b/arch/arm/mach-omap2/board-omap3devkit8000.c
@@ -0,0 +1,604 @@
+/*
+ * linux/arch/arm/mach-omap2/board-omap3devkit8000.c
remove the path, it should be something like:
board-omap3devkit8000.c - Texas Instruments' DevKit 8000
+static struct omap_nand_platform_data omap3devkit8000_nand_data = {
+ .options = NAND_BUSWIDTH_16,
+ .parts = omap3devkit8000_nand_partitions,
+ .nr_parts = ARRAY_SIZE(omap3devkit8000_nand_partitions),
+ .dma_channel = -1, /* disable DMA in OMAP NAND driver */
+ .nand_setup = NULL,
+ .dev_ready = NULL,
this is static variable, you don't need these NULL here.
+};
+
+static struct resource omap3devkit8000_nand_resource = {
wrong, should be a real array:
static struct resource omap3devkti8000_nand_resources[] = {
{
.start = ??,
.end = ??,
.flags = IORESOURCE_MEM,
},
};
+static struct platform_device omap3devkit8000_nand_device = {
+ .name = "omap2-nand",
+ .id = -1,
+ .dev = {
+ .platform_data = &omap3devkit8000_nand_data,
+ },
+ .num_resources = 1,
+ .resource = &omap3devkit8000_nand_resource,
.num_resources = ARRAY_SIZE(omap3devkit8000_nand_resources),
.resource = omap3devkit8000_nand_resources,
+static struct gpio_led gpio_leds[] = {
+ {
+ .name = "led1",
+ .default_trigger = "heartbeat",
+ .gpio = 186,
+ .active_low = true,
+ },
+ {
+ .name = "led2",
+ .default_trigger = "mmc0",
+ .gpio = 163,
+ .active_low = true,
+ },
+ {
+ .name = "ledB",
+ .default_trigger = "none",
+ .gpio = 153,
+ .active_low = true,
+ },
+ {
+ .name = "led3",
+ .default_trigger = "none",
+ .gpio = 164, /* gets replaced */
if so, you should initialize to -EINVAL.
+static struct ads7846_platform_data ads7846_config = {
+ .x_max = 0x0fff,
+ .y_max = 0x0fff,
+// .x_plate_ohms = 180,
+// .pressure_max = 255,
why this commented code with the wrong comment style here ?
+static struct spi_board_info omap3devkit8000_spi_board_info[] __initdata = {
+ {
+ .modalias = "ads7846",
+ .bus_num = 2,
+ .chip_select = 0,
+ .max_speed_hz = 1500000,
+ .controller_data = &ads7846_mcspi_config,
+ .irq = OMAP_GPIO_IRQ(OMAP3_DEVKIT_TS_GPIO),
+ .platform_data = &ads7846_config,
+ }
+};
+
+
one blank like is enough.
+#define OMAP_DM9000_BASE 0x2c000000
+
+static struct resource omap_dm9000_resources[] = {
+ [0] = {
+ .start = OMAP_DM9000_BASE,
+ .end = (OMAP_DM9000_BASE + 0x4 - 1),
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = (OMAP_DM9000_BASE + 0x400),
+ .end = (OMAP_DM9000_BASE + 0x400 + 0x4 - 1),
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .start = OMAP_GPIO_IRQ(OMAP_DM9000_GPIO_IRQ),
+ .end = OMAP_GPIO_IRQ(OMAP_DM9000_GPIO_IRQ),
no need to initialize end here.
+static void __init omap_dm9000_init(void)
+{
+ if (gpio_request(OMAP_DM9000_GPIO_IRQ, "dm9000 irq") < 0) {
+ printk(KERN_ERR "Failed to request GPIO%d for dm9000 IRQ\n",
+ OMAP_DM9000_GPIO_IRQ);
+ return;
+ }
+
+ gpio_direction_input(OMAP_DM9000_GPIO_IRQ);
+}
+
+
one blank like is enough.
--
balbi
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html