From: Madhu <madhu...@ti.com>
The HSMMC1 controller on omap3630 supprts only 4-bit mode. If cpu
is 3630 configure HSMMC1 wires to 4-bit.
Signed-off-by: Madhusudhan Chikkature <madhu...@ti.com>
Signed-off-by: Tony Lindgren <t...@atomide.com>
---
arch/arm/mach-omap2/mmc-twl4030.c | 6 ++++++
1 files changed, 6 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap2/mmc-twl4030.c
b/arch/arm/mach-omap2/mmc-twl4030.c
index 3403914..7bef170 100644
--- a/arch/arm/mach-omap2/mmc-twl4030.c
+++ b/arch/arm/mach-omap2/mmc-twl4030.c
@@ -489,6 +489,12 @@ void __init twl4030_mmc_init(struct twl4030_hsmmc_info
*controllers)
/* on-chip level shifting via PBIAS0/PBIAS1 */
mmc->slots[0].set_power = twl_mmc1_set_power;
mmc->slots[0].set_sleep = twl_mmc1_set_sleep;
+
+ /* Omap3630 HSMMC1 supports only 4-bit */
+ if (cpu_is_omap3630() && c->wires > 4) {
+ c->wires = 4;
+ mmc->slots[0].wires = c->wires;
+ }
break;
case 2:
if (c->ext_clock)
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
