From: vikram pandita <vikram.pand...@ti.com>
The I2C-1 bus frequency on zoom2/zoom3/sdp3630 should be 2.4 MHz.
The speed is limited by TWL5030/GAIA; a higher speed could lead to errors
on the interface.
The maximum I2C speed depends on the system clock for GAIA:
2.2 MHz (sys-clk = 19.2 MHz)
2.4 MHz (sys-clk = 26 MHz)
2.9 MHz (sys-clk = 38.4 MHz)
For Zoom2/Zoom3/SDP3630 the system clock is 26Mhz
and hence choose 2.4Mhz for I2C1 bus speed
Signed-off-by: Vikram Pandita <vikram.pand...@ti.com>
Signed-off-by: Tony Lindgren <t...@atomide.com>
---
arch/arm/mach-omap2/board-zoom-peripherals.c | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
mode change 100644 => 100755 arch/arm/mach-omap2/board-zoom-peripherals.c
diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c
b/arch/arm/mach-omap2/board-zoom-peripherals.c
old mode 100644
new mode 100755
index 3535b7a..f14baa3
--- a/arch/arm/mach-omap2/board-zoom-peripherals.c
+++ b/arch/arm/mach-omap2/board-zoom-peripherals.c
@@ -243,7 +243,7 @@ static struct twl4030_platform_data zoom_twldata = {
static struct i2c_board_info __initdata zoom_i2c_boardinfo[] = {
{
- I2C_BOARD_INFO("twl4030", 0x48),
+ I2C_BOARD_INFO("twl5030", 0x48),
.flags = I2C_CLIENT_WAKE,
.irq = INT_34XX_SYS_NIRQ,
.platform_data = &zoom_twldata,
@@ -252,7 +252,7 @@ static struct i2c_board_info __initdata
zoom_i2c_boardinfo[] = {
static int __init omap_i2c_init(void)
{
- omap_register_i2c_bus(1, 2600, zoom_i2c_boardinfo,
+ omap_register_i2c_bus(1, 2400, zoom_i2c_boardinfo,
ARRAY_SIZE(zoom_i2c_boardinfo));
omap_register_i2c_bus(2, 400, NULL, 0);
omap_register_i2c_bus(3, 400, NULL, 0);
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
