OMAP3630 and OMAP4430 UART IP blocks have a restriction wrt RX FIFO.
Empty RX fifo read causes an abort. OMAP1/2/3 do not have this restriction.
so pass the flag UPF_NO_EMPTY_FIFO_READ in plat_serial8250_port, so that 8250
driver does not abort on empty rx fifo read
tested on zoom3(3630) board
Signed-off-by: Vikram Pandita <vikram.pand...@ti.com>
---
arch/arm/mach-omap2/serial.c | 9 ++++++++-
1 files changed, 8 insertions(+), 1 deletions(-)
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 2e17b57..669652b 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -624,8 +624,15 @@ void __init omap_serial_early_init(void)
uart->p = p;
list_add_tail(&uart->node, &uart_list);
- if (cpu_is_omap44xx())
+ if (cpu_is_omap44xx()) {
p->irq += 32;
+ /* Do not read empty UART fifo on omap4 */
+ p->flags |= UPF_NO_EMPTY_FIFO_READ;
+ }
+
+ /* Do not read empty UART fifo on omap3630 */
+ if (cpu_is_omap3630())
+ p->flags |= UPF_NO_EMPTY_FIFO_READ;
omap_uart_enable_clocks(uart);
}
--
1.6.5.1.69.g36942
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
