Change the way McBSP registers are updated: use cached values instead of relying upon those read back from the device.
With this patch, I have finally managed to get rid of all random playback/recording hangups on my OMAP1510 based Amstrad Delta hardware. Before that, values read back from McBSP registers to be used for updating them happened to be errornous. >From the hardware side, the issue appeared to be caused by a relatively high power requirements of an external USB adapter connected to the board's printer dedicated USB port. I think there is one important point that makes this patch worth of applying, apart from my hardware quality. With the current code, if it ever happens to any machine, no matter if OMAP1510 or newer, to read incorrect value from a McBSP register, this wrong value will get written back without any checking. That can lead to hardware damage if, for example, an input pin is turned into output as a result. Applies on top of patch 3 from this series: [PATCH v3 3/4] OMAP: McBSP: Introduce caching in register write operations Tested on OMAP1510 based Amstrad Delta using linux-omap for-next, commit 4421752e331cfb1d942b47ffdb26e451a8da58a0. Compile-tested with omap_3430sdp_defconfig. Signed-off-by: Janusz Krzysztofik <jkrzy...@tis.icnet.pl> --- arch/arm/plat-omap/mcbsp.c | 78 ++++++++++++++++++++++++++++++++++++++-------------------------- 1 file changed, 47 insertions(+), 31 deletions(-) --- git/arch/arm/plat-omap/mcbsp.c.orig 2009-12-01 03:37:21.000000000 +0100 +++ git/arch/arm/plat-omap/mcbsp.c 2009-12-01 03:59:33.000000000 +0100 @@ -104,7 +104,8 @@ static irqreturn_t omap_mcbsp_tx_irq_han dev_err(mcbsp_tx->dev, "TX Frame Sync Error! : 0x%x\n", irqst_spcr2); /* Writing zero to XSYNC_ERR clears the IRQ */ - MCBSP_WRITE(mcbsp_tx, SPCR2, irqst_spcr2 & ~(XSYNC_ERR)); + MCBSP_WRITE(mcbsp_tx, SPCR2, + MCBSP_READ_CACHE(mcbsp_tx, SPCR2) & ~(XSYNC_ERR)); } else { complete(&mcbsp_tx->tx_irq_completion); } @@ -124,7 +125,8 @@ static irqreturn_t omap_mcbsp_rx_irq_han dev_err(mcbsp_rx->dev, "RX Frame Sync Error! : 0x%x\n", irqst_spcr1); /* Writing zero to RSYNC_ERR clears the IRQ */ - MCBSP_WRITE(mcbsp_rx, SPCR1, irqst_spcr1 & ~(RSYNC_ERR)); + MCBSP_WRITE(mcbsp_rx, SPCR1, + MCBSP_READ_CACHE(mcbsp_rx, SPCR1) & ~(RSYNC_ERR)); } else { complete(&mcbsp_rx->tx_irq_completion); } @@ -505,24 +507,25 @@ void omap_mcbsp_start(unsigned int id, i } mcbsp = id_to_mcbsp_ptr(id); - mcbsp->rx_word_length = (MCBSP_READ(mcbsp, RCR1) >> 5) & 0x7; - mcbsp->tx_word_length = (MCBSP_READ(mcbsp, XCR1) >> 5) & 0x7; + mcbsp->rx_word_length = (MCBSP_READ_CACHE(mcbsp, RCR1) >> 5) & 0x7; + mcbsp->tx_word_length = (MCBSP_READ_CACHE(mcbsp, XCR1) >> 5) & 0x7; - idle = !((MCBSP_READ(mcbsp, SPCR2) | MCBSP_READ(mcbsp, SPCR1)) & 1); + idle = !((MCBSP_READ_CACHE(mcbsp, SPCR2) | + MCBSP_READ_CACHE(mcbsp, SPCR1)) & 1); if (idle) { /* Start the sample generator */ - w = MCBSP_READ(mcbsp, SPCR2); + w = MCBSP_READ_CACHE(mcbsp, SPCR2); MCBSP_WRITE(mcbsp, SPCR2, w | (1 << 6)); } /* Enable transmitter and receiver */ tx &= 1; - w = MCBSP_READ(mcbsp, SPCR2); + w = MCBSP_READ_CACHE(mcbsp, SPCR2); MCBSP_WRITE(mcbsp, SPCR2, w | tx); rx &= 1; - w = MCBSP_READ(mcbsp, SPCR1); + w = MCBSP_READ_CACHE(mcbsp, SPCR1); MCBSP_WRITE(mcbsp, SPCR1, w | rx); /* @@ -535,16 +538,16 @@ void omap_mcbsp_start(unsigned int id, i if (idle) { /* Start frame sync */ - w = MCBSP_READ(mcbsp, SPCR2); + w = MCBSP_READ_CACHE(mcbsp, SPCR2); MCBSP_WRITE(mcbsp, SPCR2, w | (1 << 7)); } if (cpu_is_omap2430() || cpu_is_omap34xx()) { /* Release the transmitter and receiver */ - w = MCBSP_READ(mcbsp, XCCR); + w = MCBSP_READ_CACHE(mcbsp, XCCR); w &= ~(tx ? XDISABLE : 0); MCBSP_WRITE(mcbsp, XCCR, w); - w = MCBSP_READ(mcbsp, RCCR); + w = MCBSP_READ_CACHE(mcbsp, RCCR); w &= ~(rx ? RDISABLE : 0); MCBSP_WRITE(mcbsp, RCCR, w); } @@ -570,28 +573,29 @@ void omap_mcbsp_stop(unsigned int id, in /* Reset transmitter */ tx &= 1; if (cpu_is_omap2430() || cpu_is_omap34xx()) { - w = MCBSP_READ(mcbsp, XCCR); + w = MCBSP_READ_CACHE(mcbsp, XCCR); w |= (tx ? XDISABLE : 0); MCBSP_WRITE(mcbsp, XCCR, w); } - w = MCBSP_READ(mcbsp, SPCR2); + w = MCBSP_READ_CACHE(mcbsp, SPCR2); MCBSP_WRITE(mcbsp, SPCR2, w & ~tx); /* Reset receiver */ rx &= 1; if (cpu_is_omap2430() || cpu_is_omap34xx()) { - w = MCBSP_READ(mcbsp, RCCR); + w = MCBSP_READ_CACHE(mcbsp, RCCR); w |= (rx ? RDISABLE : 0); MCBSP_WRITE(mcbsp, RCCR, w); } - w = MCBSP_READ(mcbsp, SPCR1); + w = MCBSP_READ_CACHE(mcbsp, SPCR1); MCBSP_WRITE(mcbsp, SPCR1, w & ~rx); - idle = !((MCBSP_READ(mcbsp, SPCR2) | MCBSP_READ(mcbsp, SPCR1)) & 1); + idle = !((MCBSP_READ_CACHE(mcbsp, SPCR2) | + MCBSP_READ_CACHE(mcbsp, SPCR1)) & 1); if (idle) { /* Reset the sample rate generator */ - w = MCBSP_READ(mcbsp, SPCR2); + w = MCBSP_READ_CACHE(mcbsp, SPCR2); MCBSP_WRITE(mcbsp, SPCR2, w & ~(1 << 6)); } } @@ -614,7 +618,7 @@ int omap_mcbsp_pollwrite(unsigned int id if (MCBSP_READ(mcbsp, SPCR2) & XSYNC_ERR) { /* clear error */ MCBSP_WRITE(mcbsp, SPCR2, - MCBSP_READ(mcbsp, SPCR2) & (~XSYNC_ERR)); + MCBSP_READ_CACHE(mcbsp, SPCR2) & (~XSYNC_ERR)); /* resend */ return -1; } else { @@ -623,10 +627,12 @@ int omap_mcbsp_pollwrite(unsigned int id while (!(MCBSP_READ(mcbsp, SPCR2) & XRDY)) { if (attemps++ > 1000) { MCBSP_WRITE(mcbsp, SPCR2, - MCBSP_READ(mcbsp, SPCR2) & (~XRST)); + MCBSP_READ_CACHE(mcbsp, SPCR2) & + (~XRST)); udelay(10); MCBSP_WRITE(mcbsp, SPCR2, - MCBSP_READ(mcbsp, SPCR2) | (XRST)); + MCBSP_READ_CACHE(mcbsp, SPCR2) | + (XRST)); udelay(10); dev_err(mcbsp->dev, "Could not write to" " McBSP%d Register\n", mcbsp->id); @@ -653,7 +659,7 @@ int omap_mcbsp_pollread(unsigned int id, if (MCBSP_READ(mcbsp, SPCR1) & RSYNC_ERR) { /* clear error */ MCBSP_WRITE(mcbsp, SPCR1, - MCBSP_READ(mcbsp, SPCR1) & (~RSYNC_ERR)); + MCBSP_READ_CACHE(mcbsp, SPCR1) & (~RSYNC_ERR)); /* resend */ return -1; } else { @@ -662,10 +668,12 @@ int omap_mcbsp_pollread(unsigned int id, while (!(MCBSP_READ(mcbsp, SPCR1) & RRDY)) { if (attemps++ > 1000) { MCBSP_WRITE(mcbsp, SPCR1, - MCBSP_READ(mcbsp, SPCR1) & (~RRST)); + MCBSP_READ_CACHE(mcbsp, SPCR1) & + (~RRST)); udelay(10); MCBSP_WRITE(mcbsp, SPCR1, - MCBSP_READ(mcbsp, SPCR1) | (RRST)); + MCBSP_READ_CACHE(mcbsp, SPCR1) | + (RRST)); udelay(10); dev_err(mcbsp->dev, "Could not read from" " McBSP%d Register\n", mcbsp->id); @@ -751,9 +759,11 @@ int omap_mcbsp_spi_master_xmit_word_poll spcr2 = MCBSP_READ(mcbsp, SPCR2); if (attempts++ > 1000) { /* We must reset the transmitter */ - MCBSP_WRITE(mcbsp, SPCR2, spcr2 & (~XRST)); + MCBSP_WRITE(mcbsp, SPCR2, + MCBSP_READ_CACHE(mcbsp, SPCR2) & (~XRST)); udelay(10); - MCBSP_WRITE(mcbsp, SPCR2, spcr2 | XRST); + MCBSP_WRITE(mcbsp, SPCR2, + MCBSP_READ_CACHE(mcbsp, SPCR2) | XRST); udelay(10); dev_err(mcbsp->dev, "McBSP%d transmitter not " "ready\n", mcbsp->id); @@ -772,9 +782,11 @@ int omap_mcbsp_spi_master_xmit_word_poll spcr1 = MCBSP_READ(mcbsp, SPCR1); if (attempts++ > 1000) { /* We must reset the receiver */ - MCBSP_WRITE(mcbsp, SPCR1, spcr1 & (~RRST)); + MCBSP_WRITE(mcbsp, SPCR1, + MCBSP_READ_CACHE(mcbsp, SPCR1) & (~RRST)); udelay(10); - MCBSP_WRITE(mcbsp, SPCR1, spcr1 | RRST); + MCBSP_WRITE(mcbsp, SPCR1, + MCBSP_READ_CACHE(mcbsp, SPCR1) | RRST); udelay(10); dev_err(mcbsp->dev, "McBSP%d receiver not " "ready\n", mcbsp->id); @@ -818,9 +830,11 @@ int omap_mcbsp_spi_master_recv_word_poll spcr2 = MCBSP_READ(mcbsp, SPCR2); if (attempts++ > 1000) { /* We must reset the transmitter */ - MCBSP_WRITE(mcbsp, SPCR2, spcr2 & (~XRST)); + MCBSP_WRITE(mcbsp, SPCR2, + MCBSP_READ_CACHE(mcbsp, SPCR2) & (~XRST)); udelay(10); - MCBSP_WRITE(mcbsp, SPCR2, spcr2 | XRST); + MCBSP_WRITE(mcbsp, SPCR2, + MCBSP_READ_CACHE(mcbsp, SPCR2) | XRST); udelay(10); dev_err(mcbsp->dev, "McBSP%d transmitter not " "ready\n", mcbsp->id); @@ -839,9 +853,11 @@ int omap_mcbsp_spi_master_recv_word_poll spcr1 = MCBSP_READ(mcbsp, SPCR1); if (attempts++ > 1000) { /* We must reset the receiver */ - MCBSP_WRITE(mcbsp, SPCR1, spcr1 & (~RRST)); + MCBSP_WRITE(mcbsp, SPCR1, + MCBSP_READ_CACHE(mcbsp, SPCR1) & (~RRST)); udelay(10); - MCBSP_WRITE(mcbsp, SPCR1, spcr1 | RRST); + MCBSP_WRITE(mcbsp, SPCR1, + MCBSP_READ_CACHE(mcbsp, SPCR1) | RRST); udelay(10); dev_err(mcbsp->dev, "McBSP%d receiver not " "ready\n", mcbsp->id); -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html