On Thu, Dec 03, 2009 at 04:24:35AM -0700, Paul Walmsley wrote:
> @@ -42,134 +47,19 @@ static void clk_omap1_dummy_disable(struct clk *clk)
> {
> }
>
> -static const struct clkops clkops_dummy = {
> - .enable = clk_omap1_dummy_enable,
> - .disable = clk_omap1_dummy_disable,
> -};
...
> +/*
> + * clkops
> + */
>
> - /* Turn off DSP and ARM_TIMXO. Make sure ARM_INTHCK is not divided */
> - /* (on 730, bit 13 must not be cleared) */
> - if (cpu_is_omap7xx())
> - omap_writew(omap_readw(ARM_CKCTL) & 0x2fff, ARM_CKCTL);
> - else
> - omap_writew(omap_readw(ARM_CKCTL) & 0x0fff, ARM_CKCTL);
> +const struct clkops clkops_dspck = {
> + .enable = omap1_clk_enable_dsp_domain,
> + .disable = omap1_clk_disable_dsp_domain,
> +};
>
> - /* Put DSP/MPUI into reset until needed */
> - omap_writew(0, ARM_RSTCT1);
> - omap_writew(1, ARM_RSTCT2);
> - omap_writew(0x400, ARM_IDLECT1);
> +const struct clkops clkops_dummy = {
> + .enable = clk_omap1_dummy_enable,
> + .disable = clk_omap1_dummy_disable,
> +};
>
> - /*
> - * According to OMAP5910 Erratum SYS_DMA_1, bit DMACK_REQ (bit 8)
> - * of the ARM_IDLECT2 register must be set to zero. The power-on
> - * default value of this bit is one.
> - */
> - omap_writew(0x0000, ARM_IDLECT2); /* Turn LCD clock off also */
> +const struct clkops clkops_uart = {
> + .enable = omap1_clk_enable_uart_functional,
> + .disable = omap1_clk_disable_uart_functional,
> +};
What is the reasoning for moving all clkops away from their associated
enable/disable functions right to the end of the file?
Isn't it better to have like stuff together, in much the same way that
it's preferred to have EXPORT_SYMBOL next to their function/data that
it's exporting?
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
